|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
top and bottom shock bearings
Hi all,
Done a search could not find the answer to this, The top and bottom shock bearings, what are they? Does anyone know the spec so they can be bought from a bearing supplier? Thanks. |
#2
|
|||
|
|||
Quote:
Sent from my SGH-T999L using Tapatalk |
#3
|
|||
|
|||
Im going to bump this one, lower shock bearing is ?14 ($25) top one is ?50 ($80) what a rip off !!!!!!!!!
any ideas on the top bearing please, part number or what others bikes use the same bearing? mines wrecked. Cheers. |
#4
|
|||
|
|||
The parts list for 2010 shows:
AL 1216 NEEDLES BEARING SETTING WASHER 21X10.2X1 15X3,5 CONNECTING ROD O’RING BE25814015 2 D.16X21X10 / SHOCK ABSORBER BUSHING (LOWER) I do not think there is an upper bearing - IMPORTANT QUESTION: WHAT BIKE IS IT FOR?
__________________
2003 txt250 Pro 2013 Ossa 280i |
#5
|
|||
|
|||
Hi, bikes a 2013 Ec250, sachs rear shock, I can find the top shock bearings for older bikes, up to 2010 easily for a reasonable price, they cost the same as the lower shock bearing, ?15. Newer bikes are hard to find apart from genuine parts.
|
#6
|
|||
|
|||
Ok can't help you there, it doesn't even show it on the parts diagram http://www.gasgasmotos.es/en/manuals.html Probably best to just take it to a bearing supplier and see if they can match it up for you, that is what i normally do (as i have discovered that quite often the parts are not described correctly in the parts manual)
sorry!
__________________
2003 txt250 Pro 2013 Ossa 280i |
#7
|
||||
|
||||
Quote:
|
#8
|
|||
|
|||
Well I didn't want to strip the bike as its still rideable at the moment. If I have to wait ages for parts I will miss ride time but seeing I couldn't get a genuine parts I stripped the bike pressed the bearings out and it turns out the top and bottom bearings are the same, that's not what GGUK told me or tried to sell me for a stupid price! Went to a bearing place. Got both bearings for $43.
2013 EC250 Sachs shock top and bottom bearing number is GE12PW for future refrence. this is NOT the same as older bikes. |
#9
|
||||
|
||||
Might be because the older bikes have Ohlins shocks? Good info though
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro |
#10
|
||||
|
||||
I like being able to read the deleted messages/rants!
Thanks for going through the drama and chasing the part numbers and posting them up for us Johnny. I'm not sure if the Sachs and Ohlins use the same or different bearings, but I can confirm the difference in the 2011 to 2012+ models is due to the change in frame and linkage. The older models had the split clevis which sat over the link and used a needle roller. The newer ones use a spherical bearing pressed into the clevis which sits in the linkage. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
'05 125 bottom end | marshalls113 | Parts | 0 | 04-14-2014 08:16 PM |
Bottom end bearings | Rabbitist | Enduro Engine - 2 stroke | 1 | 04-03-2012 03:58 PM |
How easilt can you feel play in the top or bottom end bearings? | stay_upright | Enduro Engine - 2 stroke | 2 | 07-26-2009 04:26 PM |
Bottom Shock Mount | PEB | Enduro Suspension | 6 | 10-12-2007 04:13 PM |