|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2014 XC300 CDI ? E start CDI different ?
I bought a 2014 with like 5 hours on it , the motor wont start unless the high beam light is off , and it is in neutral , runs well after that , I think the reason has something to do with it being a e start cdi and a non e start wiring harness , Looks like it was changed from the get go , it has the start motor power valve cover that I replaced with a LTR one ... anyone run into this issue ? ... Does anyone know if they run different CDI's ? thanks Jason
|
#2
|
|||
|
|||
Can you find an online parts fiche to check? The wiring diagrams show 7 connections for the estart CDI vs 9 connections for the non-estart bike. A capacitor stores charge on the non-estart bike.
Neutral always helps when starting since the engine turns faster. Having the headlight off might allow for a quicker charge to the capacitor.
__________________
2011 EC250E |
#3
|
|||
|
|||
I have both wire harnesses , the dealer happened to have one e start and gave it to me , one other main reason that forgot to mention is that the bike will kick back , After asking around , my friends buddy , had the same issues with his 2014 xc 300 , he removed the e start and battery on his , it would kick back and not start at all with the high beam on . We think that there are different CDI'S ... I might just run a battery with the e start harness and hook up some lights off the starter plug . maybe hot grips ! ... It would be nice to figure this out ..ugh ,,,
|
#4
|
||||
|
||||
The cdi's are different ,that's why they come with the e-start kit.
If your e-start was removed it might cause your issue. I would check out the wiring schematics.
__________________
15 GASGAS EC 250 19 Sherco SE 125R |
#5
|
|||
|
|||
Awesome thanks ! that's what we thought , now I just need to either finds a cdi , or run a battery and the old harness ... Cheers !
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2014 gasgas xc300 e | Trailking450 | General Discussions & Announcements | 3 | 08-14-2017 05:03 PM |
Removal of e-start from 2014 XC300 | CombatYoga | Enduro Electrical & Wiring | 13 | 08-17-2016 05:53 PM |
2014 xc300 | earlystock | Enduro Electrical & Wiring | 10 | 03-13-2015 03:14 PM |