|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
rear master cyl rubbing on swingarm?
Has anyone had problems with the rear master cylinder rubbing on the swingarm? i have a 2011 ec250----any fix for it?
|
#2
|
||||
|
||||
Your master cilinder mounts are slighty bend?
__________________
www.endurohp.eng.br Sherco ST300 2015 (Trials) https://www.instagram.com/leocm74/ Brasil! |
#3
|
|||
|
|||
its a brand new bike-noticed it after first ride!
|
#4
|
||||
|
||||
I think it rubs when braking hard with the swing arm compressed. I think they all do it to some degree. Might be able to bend the master cylinder tabs a bit to get more clearance, I have never got round to looking into it any further.
|
#5
|
||||
|
||||
My 2010 has never rubbed the swing arm. I'd have a look at spacing the mc away from the swingarm a bit either with some washers/shims and/or bending the mount a bit.
I did however have the actual brake line rub against the engine case which was un cool. |
#6
|
||||
|
||||
On mine, the cotter pin for the master cylinder plunger was rubbing the swing arm. Minor fix.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear brake line rubbing on case | wence | Enduro Chassis & Body | 9 | 01-24-2010 05:32 PM |
Master Cylinder rubbing on swingarm | Malcolm | Enduro Chassis & Body | 1 | 12-13-2009 12:36 PM |
Stand Rubbing on Swingarm | coolum74 | Enduro Chassis & Body | 14 | 06-16-2009 11:31 AM |
Rear brake master cylinder crossover? | bergerhag | Enduro Chassis & Body | 5 | 04-09-2009 09:26 AM |