Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Classified Advertisements > Parts

Parts New/Used Components and All Bike Part Outs


Reply
 
Thread Tools Display Modes
  #1  
Old 11-12-2012, 10:11 AM
LAWMAN's Avatar
LAWMAN LAWMAN is offline
Platinum Level Site Supporter
 
Join Date: Jul 2007
Posts: 257
Default Parting out '07 300 EC

Right after I spent serious $ freshening up this bike, I found out that it needs a total bottom-end rebuild (isn't that the way it always goes with dirt bikes?). That's more $ than I want to put in an '07, so I am going to part out the major parts. I'm not planning to mess with the smaller stuff, but if there is anything particular that you need, let me know & we'll work something out. I haven't figured out how to post pictures, but I can email them. For sales or shipments out side the continental US--contact me & we'll work something out. I'm in US zip code 38017. All prices are OBO, I just need to clear the clutter in my garage.

*This 1 has the small ignition, so I added a flywheel weight.

1. Twin Air aluminum filter cage w/brand-new filter element: Lists for $149.95, I'll sell for $85 shipped in con US. Cage is as-new, filter is new in the bag from Gofasters.

2. Rekluse clutch basket: This stops the grinding & squealing that the stock clutch always did. I used it for 3 rides, a total of a few hours. I'll sell it installed with the backing plate/gear that it bolts up to. Lists new for $249, I'll sell for $169, shipped in con US.

3. Moose Off-road clutch kit, with springs & plates, both steels & fibers. These have the same few hours on them as the basket, they are as-new. Dennis Kirk lists them for $229.95, I'll sell for $169, shipped in con US.

4. 300 cylinder, head & piston: These are in fine shape. The bore is bright & shiny with no gouges, chips or scrapes in the finish. Piston is fine. There is just the beginning of a little blow-by on the piston, so it will need new rings. $300.

5. Bottom end: No clutch, see above. It needs to have the bearings, seals & gaskets replaced. I'll sell for $100 + actual shipping, or work out a package deal for the top & bottom.

6. Wheels: In excellent shape. Front wheel bearings have an enduro & 3 or so rides on them. Rears have just a couple of rides. I'll ship with rotors attached. I don't know what they are worth; make an offer.

7. Nissin brakes: In excellent shape. Front pads have 1 enduro & about 3 rides on them, the rears another ride or 2 than that. Make an offer if interested.

8. Sachs rear shock: Re-valved & re-sprung by LTR for a 200-lb. fast B-level rider. It's a terrific shock. $300 + shipping? Or make offer. Stock spring included.

9. Marzocchi 45mm fork: Re-valved & re-spring by LTR as above. Works great. $300 + shipping? Or make offer. Stock spring included.

10. FMF Turbine Core II spark arrestor/silencer. In OK shape & never failed a sound test but I am sure it could use a re-pack. $50 + shipping.

11. Controls? Electrics? Seat base & stock foam? Frame? Sub frame? Swing arm? Etc? If anyone is interested in these, please let me know & I will pull them, get some photos, & work out a deal with you.

Thanks

John


Reply With Quote


  #2  
Old 11-12-2012, 10:14 AM
desertgasser300 desertgasser300 is offline
Banned
 
Join Date: Feb 2011
Location: Hot A@% desert AZ.
Posts: 1,872
Default

PM sent about clutch basket!
Reply With Quote
  #3  
Old 11-12-2012, 10:58 AM
LAWMAN's Avatar
LAWMAN LAWMAN is offline
Platinum Level Site Supporter
 
Join Date: Jul 2007
Posts: 257
Default

Forgot about the YZ kick starter: $30 shipped in con US.
Reply With Quote
  #4  
Old 11-12-2012, 12:42 PM
forgiven forgiven is offline
Senior Member
 
Join Date: Jan 2009
Location: Ottawa Illinois
Posts: 595
Default

I will take the kickstarter...plus I will look through the rest of the post.
Reply With Quote
  #5  
Old 11-12-2012, 12:50 PM
LAWMAN's Avatar
LAWMAN LAWMAN is offline
Platinum Level Site Supporter
 
Join Date: Jul 2007
Posts: 257
Default

OK, kickstarter is sold.
Reply With Quote
  #6  
Old 11-12-2012, 01:14 PM
siaknijustin siaknijustin is offline
Senior Member
 
Join Date: Sep 2011
Location: Blanding, Utah
Posts: 128
Default

Do you have the kickstand assembly?
__________________
'05 EC 300
Reply With Quote
  #7  
Old 11-12-2012, 01:15 PM
LAWMAN's Avatar
LAWMAN LAWMAN is offline
Platinum Level Site Supporter
 
Join Date: Jul 2007
Posts: 257
Default

Wheels are sold.
Reply With Quote
  #8  
Old 11-12-2012, 01:16 PM
LAWMAN's Avatar
LAWMAN LAWMAN is offline
Platinum Level Site Supporter
 
Join Date: Jul 2007
Posts: 257
Default

Quote:
Originally Posted by siaknijustin View Post
Do you have the kickstand assembly?
Indeed I do, in good working order. how about $35 shipped in con US?
Reply With Quote
  #9  
Old 11-12-2012, 04:21 PM
siaknijustin siaknijustin is offline
Senior Member
 
Join Date: Sep 2011
Location: Blanding, Utah
Posts: 128
Default

Quote:
Originally Posted by LAWMAN View Post
Indeed I do, in good working order. how about $35 shipped in con US?
Sounds good to me.
__________________
'05 EC 300
Reply With Quote
  #10  
Old 11-12-2012, 05:26 PM
pj7's Avatar
pj7 pj7 is offline
Gold Level Site Supporter
 
Join Date: Mar 2010
Location: Georgia
Posts: 92
Default

pm sent on subframe etc
__________________
Old GGs: 01 XC300, 02 XC125, 03 DE300, 03 DEO200, 01 SE300, 2011 EC300
Current: 05 DE250, Showa forked frankenbike 300, 05 DE300, 19 YZ250X
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off





All times are GMT -5. The time now is 04:58 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org