Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 12-17-2008, 09:04 PM
sanderjavant's Avatar
sanderjavant sanderjavant is offline
Member
 
Join Date: Dec 2006
Location: Castroville, Texas
Posts: 78
Default Fuel pump relay-where is it?

I have new fuel pump relay for a 2005 450 FSE but I can't find the old one on the bike to replace it.

Anybody know where it's located?

Could it be No 12?





Reply With Quote


  #2  
Old 12-17-2008, 11:42 PM
coolum74 coolum74 is offline
Senior Member
 
Join Date: May 2007
Location: Sunshine Coast QLD, Australia
Posts: 155
Default relay

From what I have red here its behind the right hand rear side panel. Hope this works
__________________
Adam
2006 FSE450...Gone
2011 EC300e
Sunshine Coast, Queensland
Australia
Reply With Quote
  #3  
Old 12-18-2008, 03:24 AM
bergerhag's Avatar
bergerhag bergerhag is offline
Gold Level Site Supporter
 
Join Date: Nov 2006
Location: Timr?, Sweden
Posts: 675
Default

It is not shown in the parts book.
Reply With Quote
  #4  
Old 12-18-2008, 06:50 AM
cladoo's Avatar
cladoo cladoo is offline
Site Sponsor
 
Join Date: Aug 2006
Location: Okotoks, Alberta, Canada
Posts: 557
Default

Quote:
Originally Posted by coolum74 View Post
From what I have red here its behind the right hand rear side panel. Hope this works
There are two relays there. I had to replace one once on a customers bike and the parts diagram does not show it. I replaced it with an automotive relay that was much stronger and it has worked fine since.
__________________
Claude
2019 XC300
2010 Nambotin 300 sold
'07 EC300 sold
'06 EC300 sold
'78 Suzuki RM250C2
'75 Yamaha YZ250B sold
Reply With Quote
  #5  
Old 12-18-2008, 09:51 AM
Nick's Avatar
Nick Nick is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Nevada
Posts: 560
Default

The earlier post is right, its behind the right side number plate. There are two, one for the fuel pump and one for the fan.
__________________
Dont follow me, You wont make it.
Reply With Quote
  #6  
Old 12-18-2008, 09:34 PM
sanderjavant's Avatar
sanderjavant sanderjavant is offline
Member
 
Join Date: Dec 2006
Location: Castroville, Texas
Posts: 78
Default

I guess I didn't receive a fuel pump relay.

I had been having an intermittent problem with the fuel pump not firing when I turned on the key. Now it won't start at all.

I thought the fuel pump relay was bad and that it was located next to the battery under the right panel. I replaced the original with a NAPA relay but that didn't fix it. So I decided to order the factory part. When I received the part below I was hoping the the relay was still the problem but it was located somewhere else on the bike, not the relay next to the battery.

I want to ride my bike again. It's dirt bike season in Texas.


Reply With Quote
  #7  
Old 12-19-2008, 09:36 AM
Nick's Avatar
Nick Nick is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Nevada
Posts: 560
Default

Thats it minus the cover or shroud if you want to call it that, that surronds the spades on the relay. Will it fit with the shroud ? Also check your key switch. Unplug it and use a jumper, i've had it go fubar from water intrusion.
__________________
Dont follow me, You wont make it.
Reply With Quote
  #8  
Old 12-19-2008, 09:29 PM
sanderjavant's Avatar
sanderjavant sanderjavant is offline
Member
 
Join Date: Dec 2006
Location: Castroville, Texas
Posts: 78
Default

Unfortunately I got the wrong one.

The one in the picture is the NAPA relay, it's a direct match for the relays near the battery.

In the meantime I'm going to check the key switch, that may be it.


Last edited by sanderjavant; 12-20-2008 at 08:17 AM.
Reply With Quote
  #9  
Old 12-20-2008, 08:08 PM
mike989 mike989 is offline
Senior Member
 
Join Date: Jul 2006
Location: Southern Nevada
Posts: 126
Default

I had a intermittent starting/fuel pump problem, then total failure on my 04 quad. Turned out after much electrical trouble shooting, it was the ignition switch. One of the soldered(sp) connections was hanging on by a strand or two, then finally broke. Easy fix.

Mike.
__________________
04EC300
04Wild450
07FSR450
Reply With Quote
  #10  
Old 06-25-2009, 06:50 PM
Fire Escape Fire Escape is offline
Member
 
Join Date: Nov 2006
Location: New Hampshire
Posts: 20
Default Hope that I am way too late!

My FSE 450 acted exactly like you described although it never quite got to the point of not running at all. Installing a pair of those NAPA AR 614 relays (they are cheap, figured at worst I would have a usable spare if needed out on the trail someday) made it a different bike, no more "flame out", could hear the pump prime every time I turned on the key. So far it's my best improvement, someday I will do the master link stand fix and cut the blue/yellow wire, have to make some time for that, and to actually RIDE the bike.

Bruce
__________________
No one ever calls the Fire Department because they did something smart
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
400FSE Fuel pump question Gi_GASGAS Enduro Engine 4 stroke (including EFI & Exhaust) 3 12-31-2019 03:58 PM
03 450 fuel pump voltages query hillbilly Enduro Engine 4 stroke (including EFI & Exhaust) 1 09-22-2010 04:21 PM
fuel relay Devondan Enduro Engine 4 stroke (including EFI & Exhaust) 4 10-21-2009 04:12 PM
Fuel Pump Clips Broken KTMrider58 Enduro Engine 4 stroke (including EFI & Exhaust) 3 04-15-2007 04:18 PM




All times are GMT -5. The time now is 10:31 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org