Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-16-2009, 08:01 AM
Elvis74 Elvis74 is offline
Senior Member
 
Join Date: Jan 2007
Location: Good Old Germany
Posts: 811
Default Wheels

Does sombody know, if wheels from other Makes like Yamah fits into my GasGas EC300 Year 2007?

Thanks
Elvis74


Reply With Quote


  #2  
Old 01-21-2009, 11:55 AM
cal_tony cal_tony is offline
Senior Member
 
Join Date: Oct 2008
Location: California Central Coast
Posts: 170
Default

See my other wheel posts. On my FSE 450 I am now running a 17" DRZ rear wheel and a 17" KTM front wheel. The KTM front required bearing and internal spacer changes. The DRZ wheel just required the cutting down of the external DRZ spacers.

Important things to look for in using someone else s wheel is the distance from sprocket to rotor on rear wheels and bearing size. If its close, it can be made to fit. For front wheels its much easier since there is no sprocket to worry about and just about anything can be made to fit. However, the thing to remember about front is that some of the GGs use a 25mm axle, for those only the Husky or KTM front will work.

Tony
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
SM wheels boundy Enduro Chassis & Body 0 04-25-2010 12:20 PM




All times are GMT -5. The time now is 05:56 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org