Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > Riding Techniques & Training

Riding Techniques & Training Increase Riding Skill, Physical and Mental Training, Weight Loss.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old 12-10-2017, 06:51 PM
CDN Rick's Avatar
CDN Rick CDN Rick is offline
Silver Level Site Supporter
 
Join Date: Jul 2016
Location: Niagara, Ontario
Posts: 439
Default

Quote:
Originally Posted by Jim Cook View Post
Your positioning and weighting the outside footpeg sounds good to me, although I try to keep both feet on the pegs in the tight woods.
(Weighting the outside footpeg was the only way to keep the old '87 WR430 Husky hooked up when cornering; so I've been doing it a long time. On the GasGas, it all depends on what's happening as to how much weight I put on that outside peg.)
I always lean forward with my crotch up on the tank when I'm in a hurry exiting the turns. My crotch moves up to the tank as I'm hitting the front brake.

I was simply suggesting that you try whacking the throttle open "on the way" to turning the bike (twist the throttle as you go to move the bars), so that it turns faster and gives you a faster exit speed; which gives you a head start towards the next turn. I found it gave me a noticeably higher exit speed when I mastered it. The GasGas bikes amaze me with their ability to turn under power.
Very interesting. I'm going to try this.... In a wide open pasture!

If I think it through in my head it would deweight the front tire and lose traction. But maybe I should stop thinking so much and go for a ride.
__________________
2018 GasGas EnduroGP250
2018 GasGas TXT GP300
1994 Honda CR500 (Ice Racer)
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Grip heaters on 2K-2 thejackrabbit Enduro Electrical & Wiring 4 01-19-2014 07:50 AM
Vapour Engine Temp and RPM Limit values? Hicksi Enduro Electrical & Wiring 1 12-20-2012 02:38 PM
Pistons worn out limit motohellrider Enduro Engine - 2 stroke 9 11-20-2011 07:22 PM
Stupid Question? Rev Limit? Jakobi Enduro Intake/Carburetion - 2 stroke 5 11-13-2010 05:36 AM
300 EC RPM limit? Hollywood Enduro Engine - 2 stroke 9 09-10-2008 07:59 AM




All times are GMT -5. The time now is 10:11 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org