GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

Thread Tools Display Modes
Old 09-14-2020, 11:33 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
Join Date: Oct 2010
Location: Australia
Posts: 7,981

Originally Posted by (F5) View Post
Ahh. That's my pet hate. Inline filters. Someone needs to invent a curved one. I've seen, used a right angled one but it didn't seem to cure all faults.
Gotta watch for kinks in the line.. and after a while they do block up too. Amazing how much crud can still find their way in there.

Reply With Quote

Old 09-19-2020, 06:48 PM
brads1725 brads1725 is offline
Join Date: Aug 2020
Posts: 9
Default Lean?

So I dropped the main jet down to a 172. the bike is going great once it warmed up, no bogging at. I managed to get a decent plug chop at wide open throttle on a service road at the end of my ride this weekend.
What do you reckon on this plug? Looks a bit lean, might go back up to the 175 or 178. I checked the plug last week after normal trail riding and it was black, so not lean in the 1/8 to 1/2 throttle range.
Thinking about lifting the needle clip to (from 3) 2 to go with the 175, many people out there running that combo?
Cheers all
Attached Images
File Type: jpg 20200920_114039.jpg (114.6 KB, 10 views)
File Type: jpg 20200920_114100.jpg (121.0 KB, 9 views)
Reply With Quote
Old 09-20-2020, 01:15 AM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 1,585

In the old days of leaded fuel I'd say that looks mighty fine. Not sure about unleaded, all my roadracing was with leaded av gas.

Just try the needle for feel.
'07 EC300
496 CPI Cheetah RZ/RGV hybrid
675 Street Triple R
RS125 framed MB100 racer
Stinger T125 Suzuki
Reply With Quote

base gasket, bog, squish, wot

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
wet base gasket thejackrabbit Enduro Engine - 2 stroke 6 02-09-2014 01:03 PM
300 base gasket choices? husley Enduro Engine - 2 stroke 11 01-22-2013 08:30 AM
Base Gasket re-use? motogroove Enduro Engine - 2 stroke 5 06-26-2011 07:56 PM
Base gasket Ud_luz Enduro Engine - 2 stroke 21 05-09-2008 07:38 AM
Base Gasket gtsnowcrack Enduro Engine - 2 stroke 6 09-09-2006 05:43 AM

All times are GMT -5. The time now is 10:01 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2009 -