GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1551  
Old 07-31-2020, 10:46 AM
Doc Brown Doc Brown is offline
Senior Member
 
Join Date: Dec 2017
Location: Austria, Europe
Posts: 521
Default

Quote:
Originally Posted by gasgasman View Post
Just use a left side OEM hose on the right side.
The left hose is not available as single spare part. (BE71010GG-CLJ-1)


Reply With Quote


  #1552  
Old 07-31-2020, 07:05 PM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is online now
Senior Member
 
Join Date: May 2010
Posts: 390
Default

Just go to your local auto store and shop through the heater hose. Found a perfect bend cheap as. I?m replacing the rubber hoses asap though as they tend to be affected by degreasers and swell up.
__________________
Back on a gassy! 2018 EC300! 🤘
Reply With Quote
  #1553  
Old 08-18-2020, 02:36 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 848
Default

I replaced the Rekluse brake tip I installed some months back. It has served me well, but was completely destroyed in the race a week ago.

__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #1554  
Old 09-15-2020, 02:59 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 848
Default

I discovered a split in the tank. It was not leaking a lot, but enough to notice.



As my importer didn't have a new tank in stock, I tried to glue it as a temporary fix while I'm waiting for the new tank to arrive from Spain.



Tomorrow I will fill it up and go riding, hoping for the best.
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #1555  
Old 09-18-2020, 06:55 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 848
Default

Rebuilt one fork leg with new innteck bushings and SKF seals. Kyb oil.







__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #1556  
Old 09-18-2020, 11:50 AM
Doc Brown Doc Brown is offline
Senior Member
 
Join Date: Dec 2017
Location: Austria, Europe
Posts: 521
Default

Quote:
Originally Posted by Anders View Post
Rebuilt one fork leg with new innteck bushings and SKF seals. Kyb oil.
Why only one?
Reply With Quote
  #1557  
Old 09-18-2020, 02:28 PM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 848
Default

Quote:
Originally Posted by Doc Brown View Post
Why only one?
The other one will be done in a few days.

Sent fra min YAL-L21 via Tapatalk
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #1558  
Old 09-21-2020, 08:44 PM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is online now
Senior Member
 
Join Date: May 2010
Posts: 390
Default

I finally fit up a new battery after the tiny original started to get a little tired on the cold starts. Replaced it with a SSB LH5L-BS. First one I bought was a dud and open circuited under load. 🤬
The second is a ripper and tested out at 290cca. Starts instantly dead cold. Straightened out my bent shift shaft and made a new shift shaft scorpion collar out of alloy rather than plastic which gets dented and causes shifting issues.

Fit up a force accessories rear disc guard. Typical force item didn?t fit and needed modifications to suit the 2018 on swing arms despite being listed for it. Never again will I buy force products.
__________________
Back on a gassy! 2018 EC300! 🤘
Reply With Quote
  #1559  
Old 09-21-2020, 10:45 PM
shawbagga's Avatar
shawbagga shawbagga is offline
Senior Member
 
Join Date: Feb 2012
Location: West Straya
Posts: 224
Default

Quote:
Originally Posted by Gasser Nate View Post
I finally fit up a new battery after the tiny original started to get a little tired on the cold starts. Replaced it with a SSB LH5L-BS. First one I bought was a dud and open circuited under load. ��
The second is a ripper and tested out at 290cca. Starts instantly dead cold. Straightened out my bent shift shaft and made a new shift shaft scorpion collar out of alloy rather than plastic which gets dented and causes shifting issues.

Fit up a force accessories rear disc guard. Typical force item didn?t fit and needed modifications to suit the 2018 on swing arms despite being listed for it. Never again will I buy force products.
Force suck. How much was the battery?
__________________
'18 Gasgas XC250
Reply With Quote
  #1560  
Old 09-22-2020, 12:32 AM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is online now
Senior Member
 
Join Date: May 2010
Posts: 390
Default

Quote:
Originally Posted by shawbagga View Post
Force suck. How much was the battery?
Was not cheap, $180 delivered off Fleabay. It is a pity force used to be very good.
__________________
Back on a gassy! 2018 EC300! 🤘
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
DNF today Pepperami Enduro Chassis & Body 6 09-18-2013 11:59 AM
Got my first GG today! RonMexico General Discussions & Announcements 6 02-19-2011 12:39 PM
Went Riding Today and..... coolum74 Enduro Engine 4 stroke (including EFI & Exhaust) 2 11-30-2008 01:12 PM
HELP! I tried to use my gasgas as a jet ski today! sammyj18 General Discussions & Announcements 19 11-21-2008 08:01 PM
SHNF From Today Boomhauer Pictures & Videos 13 10-30-2007 04:18 PM




All times are GMT -5. The time now is 11:17 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org