Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-21-2011, 06:39 AM
Gasgasogeros Gasgasogeros is offline
Member
 
Join Date: Oct 2009
Location: Halkidiki Greece
Posts: 67
Default GG jetting

Hi after e lot of test on 2004 ec300 i find the solution of jetting end is very simple the gg moto run cold and needs rich setting on carb 180 main , the ktm 300 use 162 main the main differences is the ktm have thermostat end run much hotter than gg so on the new model 2011 gg have thermostat on left side radiator hose if look from front . I by the thermostat from local dealer for 70 euro , with the jdjetting kit on carb, the settings is = pilot 40 , needle blue 2 from top, main 175 the bike working like 4stroke very clean acceleration of bottom to top without hit on top amazing , no oil from exhaust no smoke the best 2stoke engine bike try it , you find your smile


__________________
GasGas EC 300 2004
Reply With Quote


Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
where to go from here. jetting q. dank Enduro Intake/Carburetion - 2 stroke 105 04-11-2011 04:25 PM
04 ec 300 Jetting lordfeyr Enduro Intake/Carburetion - 2 stroke 12 01-26-2010 03:16 AM
jetting macho comacho Enduro Intake/Carburetion - 2 stroke 21 03-10-2009 03:11 AM
LTR Jetting to EC 200 -06 Mikael Enduro Intake/Carburetion - 2 stroke 8 12-16-2007 09:41 AM
06 300 jetting fury1 Enduro Intake/Carburetion - 2 stroke 1 07-31-2007 06:37 AM




All times are GMT -5. The time now is 12:07 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org