GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.

Thread Tools Display Modes
Old 03-22-2018, 02:11 PM
Trailrider Trailrider is offline
Senior Member
Join Date: Oct 2006
Posts: 157
Default AS1 float bowl question

I am adjusting the float level on my 2010 EC300 and have a question. Should fuel leak when the floats are pushed all the way to the top? If not how can I stop the flow? It dribbles fuel whenever the petcock is on. Any help would be appreciated.

Reply With Quote

Old 03-22-2018, 02:33 PM
motopsycho87 motopsycho87 is online now
Senior Member
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 886

Take the assembly apart, clean out the fuel inlet where the needle sits with carb cleaner and a small cotton bud. Fit a new needle and adjust float height.
2006 EC300 Enduro - Ignitech CDI - 42/162 NECJ#1, DEP spanny, FMF power core, .46 front 5.4 rear

2016 RM-Z450
1997 TL1000S
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Carb float bowl screws? Niall-griffiths Enduro Intake/Carburetion - 2 stroke 5 03-06-2014 07:52 PM
float bowl hight bonkeye Enduro Intake/Carburetion - 2 stroke 2 04-26-2012 03:01 AM
Carb issues - Float bowl? Hicksi Enduro Intake/Carburetion - 2 stroke 7 10-19-2011 11:21 AM
float bowl height on 2010 300??? nambo-trev Enduro Intake/Carburetion - 2 stroke 4 06-19-2011 01:08 PM
Float Bowl HELP! gasIdaho Enduro Engine - 2 stroke 3 07-18-2007 09:30 PM

All times are GMT -5. The time now is 04:06 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 -