|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Need steering head bearing info..
So I have a set of Marzocchi 48mm forks with triple clamps for my 2001 EC 300. What I've found is that the new steering axle is larger at the bottom than the old one and using the old one is not an option without some kind of bushing.
The new axle measures 28.12mm at the bottom bearing and the old one measures 25.25mm. Obviously there is no way a 30205 bearing will fit on this axle. Is there a 28mm bearing that will fit in the 30205 bearing race? Are the newer gasgas bikes using a larger lower bearing and race? More worrisome, I wonder if the lower end of the steering head on my EC 300 is smaller than on newer bikes. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Steering head bearing parts confusion | gasgasmick | Enduro Chassis & Body | 3 | 01-06-2014 07:56 PM |
Steering head bearing question | LAWMAN | Enduro Chassis & Body | 17 | 11-28-2011 05:30 PM |
what steering bearing 1995 jt25 | jt25 | Enduro Chassis & Body | 0 | 11-09-2011 02:06 PM |
steering head bearing #'s | Cruiser | Enduro Chassis & Body | 4 | 04-18-2010 08:13 AM |
Steering Head Bearing Replacement... | tprnottp | Enduro Suspension | 7 | 10-30-2006 08:45 PM |