GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-24-2012, 04:02 PM
bonkeye bonkeye is offline
Senior Member
 
Join Date: Aug 2011
Location: Bridgend, south wales, UK
Posts: 225
Default rear caliper carrier

my rear caliper carrer is worn.... ive fitted new pins but there is still loads of play, i cant find a GasGas carrier forsale unless i buy new but i do not have the funds for that so could i make one fit from another bike? say honda etc?


Reply With Quote


  #2  
Old 07-24-2012, 07:12 PM
bowhunter007's Avatar
bowhunter007 bowhunter007 is offline
Senior Member
 
Join Date: Mar 2012
Location: Tacoma, Washington
Posts: 976
Default

Quote:
Originally Posted by bonkeye View Post
my rear caliper carrer is worn.... ive fitted new pins but there is still loads of play, i cant find a GasGas carrier forsale unless i buy new but i do not have the funds for that so could i make one fit from another bike? say honda etc?
I don't see anywhere, year, model, etc.
__________________
All healed up, and ready to burn some fat.
Reply With Quote
  #3  
Old 07-24-2012, 07:52 PM
GasGas's Avatar
GasGas GasGas is offline
Senior Member
 
Join Date: Aug 2007
Location: Nova Scotia, Canada
Posts: 664
Default

Where is the play?
__________________
2018 EC 300
Reply With Quote
  #4  
Old 07-25-2012, 01:54 AM
bonkeye bonkeye is offline
Senior Member
 
Join Date: Aug 2011
Location: Bridgend, south wales, UK
Posts: 225
Default

sorry i have a 2000 mofel 300ec

the play is in the hole the large pin goes into
Reply With Quote
  #5  
Old 07-25-2012, 10:01 AM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

If you buy anything buy an EE with integated sharkfin. Besides that, if funds are low, take it to a machine shop and have them bore the worn hole and press a bushing in. We did this to my brother's Husky carrier, worked great.
Reply With Quote
  #6  
Old 07-25-2012, 04:56 PM
Cruiser Cruiser is offline
Senior Member
 
Join Date: Jul 2006
Location: Jim Thorpe Pa
Posts: 1,280
Default

Send me a picture of what you have,, I may have one.. cruiser1911@me.com
__________________
Steve
16 Beta 350rr
04 KTM 525 sx/exc gone
03 KTM 625 sxc-rehab unit-did its job and now gone
03 GG 250 ec-gone
97 GG 250 ec Gone
Reply With Quote
  #7  
Old 07-25-2012, 05:09 PM
Fred1956's Avatar
Fred1956 Fred1956 is offline
Senior Member
 
Join Date: Oct 2009
Location: NW Arkansas
Posts: 1,254
Default carrier

Like this? Has part # BE250022120 on the casting, that # fits a 2001 per gofaster fiche but I don't know about the 2000, it has approximately 8.95mm pin hole It has a rub mark from the rotor?? on the inside edge but shouldn't be an issue. Where you located?
Attached Images
File Type: jpg caliper.jpg (125.3 KB, 35 views)
__________________
Fred Overstreet
2010 EC250 SixDays
2004 GasGas EC300 -Sold to a good home
2006 GasGas EC250-Sold to a good home
2006 GasGas TXT 280 Pro

Last edited by Fred1956; 07-25-2012 at 05:11 PM. Reason: spelling
Reply With Quote
  #8  
Old 07-25-2012, 05:25 PM
bonkeye bonkeye is offline
Senior Member
 
Join Date: Aug 2011
Location: Bridgend, south wales, UK
Posts: 225
Default

im in the UK (united kingdom) reason why ive never asked in the wanted section as 99% of this forum is in the USA, the carrier on a 2000 is also BE250022120 but ive just found one in a salvage yard but its off a 2004 450 FSE but according to the manuals they are the same part number
Reply With Quote
  #9  
Old 07-25-2012, 07:19 PM
Fred1956's Avatar
Fred1956 Fred1956 is offline
Senior Member
 
Join Date: Oct 2009
Location: NW Arkansas
Posts: 1,254
Default

Good deal ! It'll have the # on the casting just check before you buy. Good Luck!
__________________
Fred Overstreet
2010 EC250 SixDays
2004 GasGas EC300 -Sold to a good home
2006 GasGas EC250-Sold to a good home
2006 GasGas TXT 280 Pro
Reply With Quote
  #10  
Old 07-28-2013, 08:43 AM
gregorythomas gregorythomas is offline
Member
 
Join Date: Jun 2009
Location: Mendham, NJ
Posts: 10
Default Rear Caliper Carrier

Don't know if anyone reads these old threads but I have the same worn bore on my 2001 EC250 caliper carrier. Took it to the machine shop on Martha's Vineyard to be bored out and sleeved. Am hoping to get it back Monday to see how it works out. My brake pads were wearing out quickly from dragging due to the caliper not being able to float well.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2008 EC Rear Caliper???? eaze_50 Enduro Chassis & Body 2 01-12-2012 10:09 PM
05 EC300 brake caliper carrier jpelaston Enduro Chassis & Body 1 12-11-2011 01:15 PM
rear caliper replacement wardy Enduro Chassis & Body 2 08-30-2010 08:07 PM
Rear Brake Caliper blitz11 Enduro Chassis & Body 11 10-28-2008 04:38 PM




All times are GMT -5. The time now is 12:38 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org