GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Product Reviews

Enduro Product Reviews Feedback & Comments on Products Tested


Reply
 
Thread Tools Display Modes
  #1  
Old 12-13-2007, 08:11 PM
FFRDave FFRDave is offline
Senior Member
 
Join Date: Aug 2006
Location: Richland, Washington USA
Posts: 173
Lightbulb "04"MC, "05"EC Whats the diff ??

I have a 2005 gasser EC 250 thats well on its way to getting a 300cc upgrade. My "05" has all of the LTR goodies except for the exhaust spigot. I also had the Squish-band sdjusted at RBD.



Is a 2004 Gasser completely interchangable with a 2005 Gasser ?



Last edited by FFRDave; 12-13-2007 at 10:00 PM. Reason: too big
Reply With Quote


  #2  
Old 07-23-2014, 04:23 PM
stian stian is offline
Senior Member
 
Join Date: Sep 2013
Posts: 205
Default

Quote:
Originally Posted by FFRDave View Post
I have a 2005 gasser EC 250 thats well on its way to getting a 300cc upgrade. My "05" has all of the LTR goodies except for the exhaust spigot. I also had the Squish-band sdjusted at RBD.



Is a 2004 Gasser completely interchangable with a 2005 Gasser ?

Think its Enduro and Motocross. Jetting is different, and wiring harness should also be different (note; more wires to EC; lights, blinkers etc.)
Suspension should also be setup some different, or other shocks.

Other than that, the same.
__________________
07` EC300SM. 09` KTM 250EXC. 70`CB350
Reply With Quote
  #3  
Old 07-23-2014, 06:29 PM
einsteingarage einsteingarage is offline
Senior Member
 
Join Date: Jun 2009
Location: Concord NH
Posts: 452
Default

If you are doing a full motor swap it won't work the bottom motor mount is different from 04 to 05

I actually have an 05 frame setup for an 04 motor in the basement
Reply With Quote
  #4  
Old 07-25-2014, 11:52 AM
DWreck DWreck is offline
Member
 
Join Date: Jul 2006
Location: Bartlesville, OK
Posts: 50
Default

It is my understanding that they made a small change to the frame geometry going from 04 to 05.
Pretty sure the MC's have four speed transmissions.
My 04 is a DE (Dealer Edition) and came with the mx ignition. Around this time they gave the dealers some options on how they wanted the bikes so they were not all exactly the same. Some had lights, some didn't.
I would think that swapping top ends would not be a problem.
Reply With Quote
  #5  
Old 07-25-2014, 12:54 PM
djroggen's Avatar
djroggen djroggen is offline
Senior Member
 
Join Date: Aug 2010
Location: Ortonville, MN
Posts: 575
Default

The main thing to remember with GasGas is that the model, can mean something but more typically means little.
__________________
2013 GasGas 300
2004 GasGas 200
2011 GasGas 300
Ortonville Minnesota
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
"attn." "new England Boys" RONALD BRUNDIGE General Discussions & Announcements 9 11-17-2008 09:19 PM
"B" piston in an "A" bore? Kokanee Enduro Engine - 2 stroke 6 09-04-2006 08:10 PM
Recommendation: add "Injury/Recover" and "Riding Techniques" sections MattR Suggestion Box 2 07-18-2006 10:19 PM




All times are GMT -5. The time now is 08:19 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org