Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-13-2016, 02:30 PM
GLantern's Avatar
GLantern GLantern is offline
Senior Member
 
Join Date: Apr 2013
Location: Long Island, NY
Posts: 240
Default 2012 Magura Clutch Rebuild

Does anyone know the Magura rebuild kit part number for the 2012 gasgas 300? Mine is leaking at the lever, it is time to rebuild it. I couldn't find the size or the info I needed on it.


Sent from my iPhone using Tapatalk


Reply With Quote


  #2  
Old 01-13-2016, 05:57 PM
GGRider01 GGRider01 is offline
Senior Member
 
Join Date: Jun 2015
Posts: 483
Default

Are you sure it's Magura? Looking at the microfiche for that year shows an AJP just like the one on my 2001 EC 300 - the kind with the stamped metal bar clamp with 2 screws to secure it. If it is Magura, maybe pictures would help pinpoint the model.
Reply With Quote
  #3  
Old 01-14-2016, 09:45 AM
GLantern's Avatar
GLantern GLantern is offline
Senior Member
 
Join Date: Apr 2013
Location: Long Island, NY
Posts: 240
Default

It is definitely a Magura, it says it on the MC. I'll get a picture tonight to share.


Sent from my iPhone using Tapatalk
Reply With Quote
  #4  
Old 01-14-2016, 03:40 PM
Elvis74 Elvis74 is offline
Senior Member
 
Join Date: Jan 2007
Location: Good Old Germany
Posts: 811
Default

You can find them on eBay from magura, KTM, moose racing and all balls

Just look for magura repair kit


Send from iPhone using Tapatalk
__________________
4 strokes are only good for power generators
Reply With Quote
  #5  
Old 01-14-2016, 10:22 PM
GLantern's Avatar
GLantern GLantern is offline
Senior Member
 
Join Date: Apr 2013
Location: Long Island, NY
Posts: 240
Default

I found out it's a 9.5, it is stamped on the bottom.


Sent from my iPhone using Tapatalk
Reply With Quote
  #6  
Old 02-26-2017, 10:09 PM
Watty Watty is offline
Member
 
Join Date: Mar 2014
Location: uk
Posts: 26
Default

Did you ever find one? I've been searching but can only find size 10
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Updating hyd clutch AJP to Magura??? boardrider247 Enduro Engine - 2 stroke 8 05-30-2014 06:34 AM
Magura clutch master (question) Mick Enduro Chassis & Body 11 12-21-2013 05:35 PM
Magura clutch MC size on 2012 XC300? Bandit9 Enduro Chassis & Body 2 11-05-2013 07:01 AM
2012 magura clutch lever Diggs345 Enduro Chassis & Body 11 06-27-2013 01:30 PM
Magura clutch master cylinder on a GG??? ktmguy23 Enduro Engine - 2 stroke 12 04-20-2009 12:44 PM




All times are GMT -5. The time now is 09:53 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org