Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 04-17-2017, 10:04 AM
eranmu eranmu is offline
Member
 
Join Date: Aug 2016
Posts: 7
Default power valve ec 125 2013

Hi,
power valve broken in my engine
The cylinder not damaged.
Anyone now if the yamaha yz 125 power valve are the same as gas gas?
And whats year?
I prefer yamaha parts then athena.
Thanks a lot.


Reply With Quote


  #2  
Old 04-18-2017, 06:27 AM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

Eric Gorr did a cylinder hone for me and confirmed the GG 125 were interchangeable with the YZ125 power valves. I did not find out which specific years but after looking at some on Ebay. There appear to be two possibilities. They look like the ones from 1997 to 2004 or from 2005 to present.
Reply With Quote
  #3  
Old 04-18-2017, 08:52 AM
Elvis74 Elvis74 is offline
Senior Member
 
Join Date: Jan 2007
Location: Good Old Germany
Posts: 811
Default

Why don't you ask Eric Gorr again?!
I'm very interested in the result.


Gesendet von iPhone mit Tapatalk
__________________
4 strokes are only good for power generators
Reply With Quote
  #4  
Old 04-18-2017, 05:02 PM
rvangeel rvangeel is offline
Senior Member
 
Join Date: Oct 2015
Location: Ontario, Canada
Posts: 102
Default

The main parts are the same if not very very close but I did notice small differences in the spring like things that close the power valve. I have one in my garage. I'll try to take pictures tonight and post them.


Sent from my iPhone using Tapatalk
Reply With Quote
  #5  
Old 04-18-2017, 09:40 PM
rvangeel rvangeel is offline
Senior Member
 
Join Date: Oct 2015
Location: Ontario, Canada
Posts: 102
Default

Sorry. I can't seem to find the cylinder. My friend must have taken it back.


Sent from my iPhone using Tapatalk
Reply With Quote
  #6  
Old 04-19-2017, 07:03 AM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

Quote:
Originally Posted by Elvis74 View Post
Why don't you ask Eric Gorr again?!
I'm very interested in the result.


Gesendet von iPhone mit Tapatalk
It was 2 yrs ago. While Eric has a fantastic memory, it is probably better to compare what you have to both the two versions I referenced (1997 to 2004) or (2005 to present) and buy the matching pieces.
Reply With Quote
  #7  
Old 04-19-2017, 07:08 AM
Elvis74 Elvis74 is offline
Senior Member
 
Join Date: Jan 2007
Location: Good Old Germany
Posts: 811
Default

Ok thanks


Gesendet von iPhone mit Tapatalk
__________________
4 strokes are only good for power generators
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ec 300 power valve Jonisaacson17 Enduro Engine - 2 stroke 11 07-18-2016 09:01 PM
Power Valve ? BigAl Enduro Engine - 2 stroke 4 01-05-2015 09:08 PM
Loss of power - suspect power valve Jonny Halls Enduro Engine - 2 stroke 4 01-22-2013 09:56 AM
power valve nut bonkeye Enduro Engine - 2 stroke 4 10-11-2012 06:40 PM
Power valve bens25au Enduro Engine - 2 stroke 2 02-09-2008 11:02 PM




All times are GMT -5. The time now is 10:21 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org