#1
|
|||
|
|||
Suspension Guru in North Is NZ
Does anyone have a recommendation for a good place to go somewhere in the north Island for a re-valve etc, that is knowlegable with Marzocchi forks and the PFP system. Idealy they will be good at setting up bikes for trailriding and not just MX. I live in Auckland and have a 2015 EC200.
I hear Linton at DAS Moto in Christchurch is ok, and Moto SR in Taupo advertise servicing Marzocchi's and i contacted Moto SR but the guy sounded a bit vague on it and wanted to do a $40 over the net suspension tune advice thing. People on here that live in the USA rave about LT suspension services for Marzocchi's,thats the kind of thing im looking for. Cheers Rog. |
#2
|
||||
|
||||
Linton is good. The other obvious person is Robert Taylor at Kiwi suspension services in new Plymouth, the biggest suspension only operation.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#3
|
||||
|
||||
Let us know how you get on m8...i have a 13' 200 that could use a service/revalve.Iv got it as close as i can stock but it could be better.the biggest issue is over aggressive rebound.i think im about 10/11 clicks in from stock to get it working with pfp at 1/2-1 turn from full out.around 80-100hrs from new it did loosen up a little.
__________________
2013 ec200r |
#4
|
||||
|
||||
Could try Mark at Mspec. He has done Sachs & Marzocchi forks on my gassers with good results.Very reasonably priced.
Phone | 07 5444080 Mobile | 021 426 247 Email | info@mspecracing.com Address | 574 Ohauiti Road, Tauranga, 3173 |
#5
|
|||
|
|||
i might give Mspec a call and see what he says,i had a chat with Linton and he is a very knowlegable guy,nice to chat too and gave me lots of info,but he was honest to say these forks are not that easy to tune to trail riding conditions,as i gather from the many posts on the Suspesion Forum.
|
#6
|
|||
|
|||
oops,too tired to spell suspension.
|
#7
|
||||
|
||||
Just a hint: It is possible to edit your previous posts.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need someone who is a gasgas guru | chaddlez | Enduro Engine 4 stroke (including EFI & Exhaust) | 3 | 03-12-2016 11:37 PM |
Need someone who is a gasgas guru | chaddlez | Enduro Electrical & Wiring | 0 | 02-27-2016 12:15 AM |
Need someone who is a gasgas guru | chaddlez | Enduro Engine 4 stroke (including EFI & Exhaust) | 0 | 02-26-2016 07:27 PM |
North East Suspension Shop Recommendation | smallpuffydog | Enduro Suspension | 9 | 08-12-2011 04:07 PM |
Ok gasgas guru's.... riddle me this | Xman218 | Enduro Engine - 2 stroke | 15 | 03-14-2009 09:52 AM |