Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-28-2021, 02:56 AM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 644
Default

Quote:
Originally Posted by Demi View Post
thanks Nate...it all makes more sense now that I have it apart. I ended up using a map gas torch to heat the top up hot enough instead of the heat gun, bearing came right out too bad I have a cobbed up cover now, pretty annoyed with myself. Knew it was something simple. Hopefully I can make it look good, being that the hole is on the back side, it should be ok. I have several inquiries out there for a new cover however. Need a new 6902Z bearing... once it gets back together, I know the top bearing just needs setting enough for the circlip, then both gears should spin freely right?

Thanks for the support!
Yeah should spin easy as with barely any effort, seat the pinion enough to still have minimal play but no drag.
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2005 EC300 Kick Start spline/shaft icebergstu Enduro Engine - 2 stroke 2 03-08-2019 01:46 AM
kick start shaft dANbOT Enduro Engine - 2 stroke 11 09-07-2015 11:20 AM
E start removal erniebearskin Enduro Electrical & Wiring 5 02-14-2013 08:45 PM
Balance shaft removal. darren Enduro Engine - 2 stroke 3 11-15-2009 05:18 PM




All times are GMT -5. The time now is 08:39 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org