|
Ride Reports Tell us all the gorey details! |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
My '11 XC 300-E maiden voyage initial impressions.
I finally got to ride the new GG today! Mother Nature cooperated in Chester, SC and we loaded up the bikes and rode at TNT Motorsports for 5 hours. 60 degrees and partly cloudy skies. Couldn't have been better for a southern Winter ride!
I'll cut to the chase and boil my first impression down to one statement: "Wow, this is exactly what I remembered about riding my buddy's '08 300!" Now, what does that mean?...
New good stuff I've noticed on the '11 model:
I'll withhold most jetting comments for a later post since I was riding in "break-in" mode with a 40:1 mixture. However, I'm 90% sure the stock needle will be replaced. I'm also "working through" a blubbery off-idle situation that is pretty annoying. So far, I'm down one pilot from stock and 1 clip leaner on the needle... with slight improvement. Stay tuned. One definite con... the rear brake lever position needs work. Too high in relation to the footpeg. It just ain't where your brain thinks it should be. Thankfully the front brake works so well! And one absolutely inexcusable blunder... the rear tire is absolutely, without a doubt, the biggest POS abomination I've ever seen on a new bike! At first, I thought it was me. But after the third ride, through various terrains ranging from rocks to roots to ruts to NC clay mud... this tire simply refused to bite into anything. Given the overall outstanding handling characteristics of this bike, I can't wait to feel what it's like with a real rear tire. Spain must be getting some major discounts from Metzeler. Suspension worked well with stock settings. But it needs to be broken-in to give a fair assessment. Again, you have to remember I'm an old fat guy who will never ride this bike close to its capability. Like I said, stay tuned. This was just a shakedown cruise. The bike needs to be broken-in to give a 100% fair assessment. I also plan to compare the XC to my '09 Husky WR 300. |
#2
|
||||
|
||||
So tomorrow morning when you wake up and wonder why your face hurts so much... well it cuz you were smiling in your sleep all night.
Congrats. On your new ride. I cut about a 1/4" off the back brake rod so it would lower the pedal. I found standing it was even worse. Now all you have to do is post up some pictures.
__________________
HuskyDude 10 EC300XC 08 TE510 07 TXT 280 77 TY175 |
#3
|
|||
|
|||
Hey Krieg I've been waiting for your ride report and it sounds about like I thought it would go. I thought you would like the handling, light weight feeling, and the awesome clutch. You have me re-thinking the estart option. As suggested just cut a little off the rear brake bolt and it will feel a lot better I was hoping the stock rear tire would be better than the 2010 but it sounds like it's still a miss. Once the engine is broken in and you sort the jetting I think you gonna love the smooth broad power the 300 lays down. Well I look forward to your Husky vs GasGas ride report. Enjoy!
|
#4
|
||||
|
||||
Well done Krieg ... I do believe you've been converted. Now just pass the message on to Geno
Quote:
__________________
Steven Beane #275 PlusOnePerformance - Superior Service the World Over - Dearborn MI AMA District 14 (Michigan) Officer afterhourscycle.com Michigan's Beta and TM Race Headquarters |
#5
|
||||
|
||||
Quote:
I was able to cut about 5mm off the threads of the brake pushrod without removing it from the bike..with a cut off wheel..took 5 min I like to be able to reach for the rear brake....instead of having it under your toe all the time kinda smells funny after a while ? Mine jetting was ok at 2000ft 70 F....but sucked at low temps High alt.....I did exactlly the same as you with jetting....yes the low end burble is annoying ......Did you get a different CHN needle in "the kit" CCK (sudco) or N3EG N3CH (dealer)other options |
#6
|
||||
|
||||
Quote:
|
#7
|
||||
|
||||
Quote:
I have them but my bikes are in the basement for winter....havent had a chance to try them yet curious about the JD kit too... |
#8
|
||||
|
||||
Quote:
I think it was the red needle 3rd clip and I left the main alone.
__________________
HuskyDude 10 EC300XC 08 TE510 07 TXT 280 77 TY175 |
#9
|
||||
|
||||
I just pulled the trigger on ordering the JD kit. Stay tuned!
|
#10
|
||||
|
||||
glad you liked the bike,let us know how the jet kit works out for you
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Demo ride impressions | rancero86 | Ride Reports | 2 | 05-25-2010 07:23 AM |
08 ec300. First impressions. | cvl05 | Enduro Product Reviews | 5 | 07-27-2009 09:19 PM |
Impressions of the '08 EC200, EC300 and FSR450 | bergerhag | Ride Reports | 3 | 04-28-2008 05:01 PM |
06 300EC first ride impressions on 1st and 2nd gear. | colinmc400 | Enduro Intake/Carburetion - 2 stroke | 13 | 05-11-2007 12:58 AM |