Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Classified Advertisements > Parts

Parts New/Used Components and All Bike Part Outs


Reply
 
Thread Tools Display Modes
  #1  
Old 03-09-2018, 12:57 PM
EnduroNut EnduroNut is offline
Member
 
Join Date: May 2009
Posts: 44
Default 2013 250 top end - about 4 hours total

I have a complete 2013 top end(cylinder, piston kit, head) with about 4 hours since new - going to a complete 300 top end. Will need a gasket set and you are good to go!
$400 + postage

PS>> My 300 top end should be here around the 20th and will be shipped then via UPS

SOLD!!



Last edited by EnduroNut; 05-08-2018 at 09:41 PM. Reason: PRICE DROP!
Reply With Quote


  #2  
Old 03-09-2018, 05:44 PM
EnduroNut EnduroNut is offline
Member
 
Join Date: May 2009
Posts: 44
Default Lower Price

$400 for a complete top end minus gaskets!

Last edited by EnduroNut; 03-22-2018 at 09:21 PM. Reason: PRICE DROP!
Reply With Quote
  #3  
Old 03-09-2018, 10:44 PM
barbotte barbotte is offline
Member
 
Join Date: May 2017
Posts: 54
Default

interested on the 300 where about are you ??
Reply With Quote
  #4  
Old 03-10-2018, 06:54 AM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

I think he is converting from a 250 to a 300 so he is selling the 250 top end.
Reply With Quote
  #5  
Old 03-10-2018, 07:30 AM
EnduroNut EnduroNut is offline
Member
 
Join Date: May 2009
Posts: 44
Default

Sorry for the misunderstanding... The top end is a 250 that I am selling. Changing to a PS3 300 top end.
Reply With Quote
  #6  
Old 03-10-2018, 09:08 AM
Danj56's Avatar
Danj56 Danj56 is offline
Bronze Level Site Supporter
 
Join Date: Jul 2012
Posts: 201
Default

Too bad it won't fit a 200 crank
Reply With Quote
  #7  
Old 03-10-2018, 10:04 AM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

Actually the 250 and 300 cylinders will bolt on but the cylinder is about 0.2" taller and the piston sits too far down. You can do a big bore kit on the 200 to make them a 237cc.
Reply With Quote
  #8  
Old 03-10-2018, 07:41 PM
EnduroNut EnduroNut is offline
Member
 
Join Date: May 2009
Posts: 44
Default

Quote:
Originally Posted by Danj56 View Post
Too bad it won't fit a 200 crank
buy a 250 bottom end and you are good!
Reply With Quote
  #9  
Old 04-09-2018, 04:48 PM
EnduroNut EnduroNut is offline
Member
 
Join Date: May 2009
Posts: 44
Default Offers...?

Any offers? Keep in mind the complete top end is almost new - the entire bike only has lees than a tank of gas through it!
Reply With Quote
  #10  
Old 04-09-2018, 09:41 PM
frankinberg's Avatar
frankinberg frankinberg is offline
Platinum Level Site Supporter
 
Join Date: Jul 2012
Location: Brighton colorado
Posts: 264
Default Top end

How about 300.00 plus shipping to 80602
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2013 xc300 race Less than 15 hours!!! $4800OBO rzide Used Bikes 10 09-06-2015 08:37 PM
Fully Loaded 2013 XC300 - 30 hours twowheels Used Bikes 2 04-17-2015 08:44 PM
2013 XC 200 GasGas less than 10 Hours djroggen Used Bikes 8 04-14-2015 09:12 PM
04 TXT Pro 200 12 hrs total time husley Used Bikes 2 04-12-2014 12:35 PM
EC300 2008 total hours on TT speedo? stevethebrit Enduro Electrical & Wiring 2 06-16-2009 04:41 PM




All times are GMT -5. The time now is 03:27 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org