![]() |
#1
|
|||
|
|||
![]()
Hi Guys,
been searching for a flywheel puller of my bike but unsure what size will fit have read that i need a 30mm x 1.5 but then other posts have said 31mm?????? any help would be greatly appreciated, Cheers, Chad |
#2
|
|||
|
|||
![]()
I will check tonight, I believe it is the Kokosan model that fits KTM bikes, but it was hard to find a listing. I believe it is M33x1.5 Right Hand Thread, internal model. That is what I bought.
|
#3
|
|||
|
|||
![]()
WOW 33MM where do u get this information from anyways? ive read through the manual and it doesnt state any sizing
|
#4
|
|||
|
|||
![]()
is your bike 450 04???
|
#5
|
|||
|
|||
![]()
2003 450
|
#6
|
|||
|
|||
![]()
has yours got the ducati Flywheel?
|
#7
|
|||
|
|||
![]()
can u confirm if its 33mm?
|
#8
|
|||
|
|||
![]()
I have a 2005 FSE450 with ducati flywheel/stator and i have M30x1,5 thread! In the partslist diagram the 2004 and 2005 have the same code flywheel, so it should be M30x1,5.
Just made my own puller ![]() Drawing if interested ![]() |
#9
|
|||
|
|||
![]()
thanks Tafka yeh found a puller last week which was 30mm x 1.5 all pulled off now cheers for confirmation now ive gotta find a replacement stator
![]() |
#10
|
|||
|
|||
![]()
If you are in Europe i recommend motocrosscenter.com ....they have many engines for braking and prices are very good!
You can email Antonio directly....email is: [his name]@motocrosscenter.com ![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Flywheel puller | racepaul | Enduro Engine 4 stroke (including EFI & Exhaust) | 0 | 04-22-2010 06:19 AM |
Flywheel Puller | hudson_hollow | Enduro Product Announcements | 1 | 01-04-2009 09:00 PM |
Flywheel Puller? | PBWR450 | Enduro Engine - 2 stroke | 3 | 12-12-2008 05:43 PM |
FLywheel puller. | Ud_luz | Enduro Engine - 2 stroke | 1 | 04-25-2008 12:53 PM |
Puller for kickstarter knuckle | GMP | Enduro Engine - 2 stroke | 4 | 07-28-2006 06:20 AM |