|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Anyone managed to break a footpeg mount - 12'+
My 2013 model did today. Sheered the top bolt off the mounting bracket, and also broke the bracket as well. Need to remove, straighten/repair/replace, and drill out snapped bolt which will surely be a great deal of fun!
|
#2
|
||||
|
||||
Get a bit sloppy in the rocks mate?!
|
#3
|
||||
|
||||
Its the upper bolt, so the peg is actually hanging down. Must have been weighting it a bit hard, being the HUGE bloke that I am!
Right foot kept slipping off the peg and just generally didn't feel right. Thought I'd either bent the peg or torn the sole out of my boot, but ended up being the actual mounting bracket that bolts to the frame. I'll snap some pics! |
#4
|
||||
|
||||
Broken
|
#5
|
||||
|
||||
Should be an easy fix job for a bloke of your calibre mate. What grade bolts are in there? 12.9?
|
#6
|
||||
|
||||
Hopefully u didnt red loctite those or it could be painful.i guess if it goes tits up you could tackweld it at top.my 13 has welded brackets,not bolted,which annoyed me...until i saw your pic!
Looks like my broken standbolt which i had smothered in red loctite(before i had at it with the powertools and the curses started flowing!) Hopefully your bolt is more cooperative
__________________
2013 ec200r |
#7
|
||||
|
||||
I'm guessing they've been loctited from the factor. Going to be fun. Actual bracket has started to crack and sheer away too.
|
#8
|
|||
|
|||
I think the loctite will be the easy part. Just make sure you hit it with some heat..
|
#9
|
||||
|
||||
Quote:
Sent fra min GT-I9295 via Tapatalk
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#10
|
||||
|
||||
Hopefully its standard loctite.Red loctite takes something like 600degC to release.byebye paint and any plastic in the near vicinity,also oil and grease.i think theres a product called freeze release or similar for red but havent used it myself...i have however tried the wifes creme brulee gas torch to no avail!
__________________
2013 ec200r |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Footpeg decisions | SpeedyManiac | Enduro Chassis & Body | 14 | 09-24-2015 10:31 AM |
Footpeg Crossover? | DirtbikeMichigan | Enduro Chassis & Body | 14 | 03-21-2015 07:56 AM |
Footpeg Dimensions | Neil E. | Enduro Chassis & Body | 16 | 10-15-2014 08:56 PM |
footpeg mounts damaged | jasont1532 | Enduro Chassis & Body | 3 | 07-05-2009 12:49 PM |
Footpeg brackets | blitz11 | General Discussions & Announcements | 5 | 06-24-2008 08:57 AM |