Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-19-2017, 06:07 AM
Alexandros Alexandros is offline
Member
 
Join Date: Oct 2017
Posts: 2
Default EC125 2007 jetting

Hi, does anyone knows any base jetting for an EC125 2007?



Last edited by Alexandros; 11-19-2017 at 08:59 AM.
Reply With Quote


  #2  
Old 11-20-2017, 07:49 PM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

have you checked the jetting database Sticky?
Reply With Quote
  #3  
Old 11-21-2017, 01:27 PM
Jim Cook's Avatar
Jim Cook Jim Cook is offline
Platinum Level Site Supporter
 
Join Date: Sep 2006
Location: Smackover, Arkansas (AR)
Posts: 687
Thumbs up

I did not see a 125 listed in Matt R's sticky of the jetting database.

With the '01 XC125 we had at the shop:

AS1 Keihin
N1EF needle with the clip in the third position
40 pilot
180 main jet

This was before I learned a lot of the info about the jetting that I now know, but it worked pretty well.

The bike was super sensitive about the jet needle and which groove the clip was in. Just a shade too lean and it had no bottom end power. One groove on the needle made all the difference when riding the bike in the mountains. It went from a nightmare ride to a rocketship with good low/mid-range torque.

.
__________________
Jim Cook
Smackover Racing
Team LAGNAF
'11 Gas Gas EC250 (primary ride)
'06 Gas Gas DE300
2004 Gas Gas TXT300 Pro
'94 Husaberg FE350
'86 Yamaha IT200
'86 Honda TRL200 Reflex
'04 KTM 525EXC (soon to be dual sported)
Several others, including project bikes, Deb's bike, and a fleet of grandkids' bikes

Let's go riding!
http://www.jebruns.com/Wudi19/wudi19.html
http://www.ahrma.org/schedules-results/cross-country/
Reply With Quote
  #4  
Old 11-23-2017, 09:55 AM
Alexandros Alexandros is offline
Member
 
Join Date: Oct 2017
Posts: 2
Default

Thanks for the replies! Finally, i contacted local GG and they suggested me as stock jetting:

Needle: NOZI (position 3)
Main Jet:180
Pilot: 45
Air Screw: 1.5 turn
Throttle Valve: 7

EC 125 2007 wears a Keihin 38 PWK.
Reply With Quote
  #5  
Old 11-23-2017, 01:41 PM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

Large squish and low compression make them difficult to jet.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help - 2007 EC 200 jetting chucky Enduro Intake/Carburetion - 2 stroke 12 06-27-2018 04:49 AM
2011 ec125 Six Days [Jetting] rosco Enduro Intake/Carburetion - 2 stroke 8 03-18-2017 09:21 PM
EC125 - base line jetting doutsh Enduro Intake/Carburetion - 2 stroke 9 09-08-2014 12:11 PM
2007 EC125 Caliper gg125 Enduro Chassis & Body 1 07-29-2014 09:32 AM
2007 EC300 Jetting The Angry Chook Enduro Intake/Carburetion - 2 stroke 3 06-04-2013 06:07 AM




All times are GMT -5. The time now is 01:35 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org