|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
Just to update folks if you've found this thread. Here's the latest ebay ad for these parts:
http://www.ebay.com/itm/Gas-Spring-S...03b3c4&vxp=mtr Thanks for the discoveries! |
#22
|
|||
|
|||
I had the same issue on my 2002 EC300 and found that the Zeta one listed for the Handa CRF range is a perfect fit and looks cool too.
|
#23
|
|||
|
|||
Checkpoint Offroad Bushing Install
I saw this video that explains the install procedure and the clearance issues.
http://www.youtube.com/watch?v=tbdju6ayLkI
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#24
|
|||
|
|||
Found these on Amazon too.
http://www.amazon.com/Festo-3110-SG-.../dp/B00CJPRZAW Great post, looking forward to improving the feel
__________________
-Keith '08 EC250 and some other bikes. |
#25
|
|||
|
|||
Another heads up per Matt @ Checkpoint. The bushing from Checkpoint is for '11 and older bikes only. Site says "all gasgas" which is incorrect. Doesn't affect me but might you.
__________________
-Keith '08 EC250 and some other bikes. |
#26
|
|||
|
|||
Thanks for the headsup, I have a 2011. What is the 2014/2015 GasGas pedal design when they switched back to the exterior mounted pedal as opposed to the 2012 pedal that tucked into the frame(but jammed with mud)? Does the 2014/2015 need a better bushing or was the oem bushing redesigned?
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#27
|
|||
|
|||
I have a 2015 EC200, and can confirm the bushing does not fit the bike.
Unfortunately I have the exact same issue. Anyone solved it for newer bikes? |
#28
|
||||
|
||||
+1 for Checkpoint bushing on '07 EC200.
Hi guys,
I can confirm the great little item from Checkpoint. I cleaned everything, put in new o-rings and snugged it up: NO SLOP, sideways at least. I have been seriously annoyed about the slop and have replaced the stock parts including the brass sleeve in the brake arm, only to have the slop issue remain. Now I'll keep an eye on the clevis for vertical slop. Later
__________________
mint 2008 EC200. Earlier bikes: Husqvarna WR125 '12, Husaberg FE450 '10, Sherco 4.5i '05, EC300 '07, YZ450 '03, WR250F '01, WR400F '00. |
Tags |
brake, bushing, celvis, clevis, pedal, rear |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear brake clevis | Fred1956 | Enduro Chassis & Body | 12 | 01-24-2010 02:51 AM |
Rear brake pedal | HydroDog | Enduro Chassis & Body | 0 | 03-09-2008 10:48 PM |