2018 KYB stock setup

[Motorman_55792]

Originally Posted by Thompo

http://www.gasgasrider.org/forum/sho...1&postcount=16

Did you measure the shims?

[Thompo]

Hello, these weren't mine but i was hunting for the same info as i was putting some YZ KYBs onto my 2011 and wanted to see where the 2018/19 bike were starting at.

Im 99% sure i asked somewhere (here or Facebook) and was told they started at 32mm and tapered down in 2mm increments as expected, but the guy had no thicknesses or final clamp dimensions

[Hooligan]

Originally Posted by Thompo

Hello, these weren't mine but i was hunting for the same info as i was putting some YZ KYBs onto my 2011 and wanted to see where the 2018/19 bike were starting at.

I am contemplating grafting a set of YZ KYB forks onto my 2010 EC250.

Did you use the YZ triples? Or some other set of triples that fit the KYB forks?

Could you PM me direct at cronhelm@shaw.ca as I don't come here very often. Thanks!