Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Other Bikes... > All Other Bikes...

All Other Bikes... KTM, Husky, VOR, Husaberg & Hondayamazuki...


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 05-05-2017, 07:41 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,548
Default

Quote:
Originally Posted by Zrt1200 View Post
Thanks. As now I know why when I searched it showed a CRF450. I did a bunch of search's and found all kinds of info on installing the Honda rekluse. A couple washers is easy. But if I needs to use a rekluse clutch basket to make it work smoothly thats another $250. As for using the Honda rekluse. Watch the video.

https://www.youtube.com/watch?v=LsqKrh8fmZk

http://www.gasgasrider.org/forum/showthread.php?t=15126
As you can tell from the bottom thread, I did a lot of work measuring the Honda Clutchpack and making it work in my Gasser. That same Clutchpack is still in my gasser and it still works perfect. You don't need the Rekluse Basket, the stock one is fine. I only use the Rekluse basket in the my gasser because I am a too picky for my own good. The stock gasser basket squeals a lot but works fine. the Rekluse is very quiet. In my 95 CR 250 My stock basket was "junk" so I had to buy a new basket so I just bought a Rekluse Basket.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
DC conversion - not floating ground johnm Enduro Electrical & Wiring 39 03-04-2020 11:11 AM
Gas Gas Contact Jt 25 95 Restoration And Help Eyetech General Discussions & Announcements 1 03-18-2016 03:33 PM
2001 XC200 Restoration Project Lincolnlock Enduro Engine - 2 stroke 19 04-22-2014 03:42 PM
Hanging Idle after wide open GasGas Enduro Intake/Carburetion - 2 stroke 10 09-06-2013 04:13 PM
My Stomping ground swazi_matt Ride Reports 10 03-02-2011 09:35 AM




All times are GMT -5. The time now is 10:44 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org