Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #11  
Old 11-01-2006, 03:11 PM
DWreck DWreck is offline
Member
 
Join Date: Jul 2006
Location: Bartlesville, OK
Posts: 51
Default

Just an update.

Once it cooled off I went to:

#5 40 p 175m N1EF 2nd clip- a little smokey and felt lean on top on when I was wide open on a grass track.

I just ordered a N1EG and N3EH to play around with. Does anyone have experience with these in the 300?

If I don't end up happy with either of these the LTR kit will be next.


Reply With Quote


  #12  
Old 11-05-2006, 10:31 AM
iancp5's Avatar
iancp5 iancp5 is offline
Senior Member
 
Join Date: Aug 2006
Location: U.K.
Posts: 829
Default

Ran with the following setup today:-

35p, 178m, LTR 0 top clip.

The 35 was a definite improvement in the woods. I had a little flat spot while winding on the throttle slowly somewhere about mid throttle. So I will go back to 2nd notch on the clip.
Reply With Quote
  #13  
Old 11-24-2006, 07:56 PM
Bultaco206 Bultaco206 is offline
Member
 
Join Date: Oct 2006
Location: NW Illinois
Posts: 20
Default

My '02 took a lot of patience. (bought new in '05) I have an FMF Gnarly with a T/C silencer. I ended up with a 35 pilot, needle in 2nd position, and a 172 main. I still have a bit of spooge on the end of the silencer, but it doesn't ooze down the body of the silencer like it did before.

Overall, the bike is a little on the fat side, but it beats the alternative. I've had no problems.
Reply With Quote
  #14  
Old 11-26-2006, 08:12 PM
DWreck DWreck is offline
Member
 
Join Date: Jul 2006
Location: Bartlesville, OK
Posts: 51
Default

I have a couple of rides on it now with the N1EG.

42p, N1EG 2nd, 178 main

It starts easier than my previous settings and is smoother from top to bottom. It feels just a tad rich everywhere but very little spooge. I could live with this but for some reason feel inclined to continue looking for perfection.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
New to me 04 ec300...jetting help 04gasgas Enduro Intake/Carburetion - 2 stroke 10 02-12-2011 05:08 PM
ec300 jetting Steve ROC Enduro Intake/Carburetion - 2 stroke 4 04-26-2010 08:49 PM
ec300 jetting moff747 Enduro Intake/Carburetion - 2 stroke 8 01-08-2008 03:21 PM
What is it with Jetting - 2004 EC300 bigkatuna Enduro Intake/Carburetion - 2 stroke 9 11-28-2007 10:28 AM
LTR jetting kit for an '03 EC300 WoodsRider Enduro Intake/Carburetion - 2 stroke 1 05-24-2007 10:09 AM




All times are GMT -5. The time now is 02:20 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org