Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #11  
Old 01-05-2011, 06:44 PM
widebear's Avatar
widebear widebear is offline
Banned
 
Join Date: Nov 2006
Location: Kamloops B.C.
Posts: 723
Default

Klaus. You are correct the old settings do not apply to the new pwk's as the float bowl is shallower on the newer versions, looks like the latest rm 250 carb's minus tps. Anybody know off hand the revised setting?


Reply With Quote


  #12  
Old 02-08-2011, 11:16 AM
stevehipkiss stevehipkiss is offline
Member
 
Join Date: Sep 2008
Posts: 14
Default

Have adjusted My float bowl, now tickover is eratic, have I adjusted it too far, or is this a coincidence ??
Reply With Quote
  #13  
Old 02-11-2011, 03:38 AM
iancp5's Avatar
iancp5 iancp5 is offline
Senior Member
 
Join Date: Aug 2006
Location: U.K.
Posts: 829
Default

Quote:
Originally Posted by stevehipkiss View Post
Have adjusted My float bowl, now tickover is eratic, have I adjusted it too far, or is this a coincidence ??
Out of interest in the possible new erraticness - did you increase or decrease fuel level?
Reply With Quote
  #14  
Old 02-18-2011, 03:47 AM
stevehipkiss stevehipkiss is offline
Member
 
Join Date: Sep 2008
Posts: 14
Default

Quote:
Originally Posted by iancp5 View Post
Out of interest in the possible new erraticness - did you increase or decrease fuel level?
increased float height, therefore decreased fuel height in bottom of carb...this is why I'm thinking now not quite enough in bowl when ticking over...poss ???
Reply With Quote
  #15  
Old 02-18-2011, 12:58 PM
iancp5's Avatar
iancp5 iancp5 is offline
Senior Member
 
Join Date: Aug 2006
Location: U.K.
Posts: 829
Default

Quote:
Originally Posted by stevehipkiss View Post
increased float height, therefore decreased fuel height in bottom of carb...this is why I'm thinking now not quite enough in bowl when ticking over...poss ???
Dunno, was just wondering if fuel height has much effect on idle. I can see how it could be effected but not sure if that would exhibit as erratic rather than just faster or slower or stalling.
Reply With Quote
  #16  
Old 04-02-2011, 01:27 AM
Tlineman Tlineman is offline
Senior Member
 
Join Date: Mar 2011
Location: Kamloops, BC
Posts: 118
Default

Just pulled my float apart and measured 6.5mm on a brand new carb, 11 EC300 never ridden. I did notice that it dribbled a little bit when on the sidestand with a full float bowl. I bent the tab slighty to raise the float height to 8mm, hoping that this will clean up a spilling fuel issue. Checking the Keihin website I came up with a float height of 6.5 mm for the PWM carb, whick I think is right considering they still speck 16mm for the old screw top air striker. Gonna try a break-in ride tomorrow and see if there is a fuel starvation issue however I don't expect a lot of WOT.
Reply With Quote
  #17  
Old 04-02-2011, 10:23 PM
Tlineman Tlineman is offline
Senior Member
 
Join Date: Mar 2011
Location: Kamloops, BC
Posts: 118
Default

Bike ran great today with a 8mm float level. Doesn't piss fuel at all when leaned over on the side stand or anything like that. Bike still is quite thirsty though. I'm gonna leave the float height as is.
Reply With Quote
  #18  
Old 04-02-2011, 11:35 PM
HuskyDude's Avatar
HuskyDude HuskyDude is offline
Super Moderator
 
Join Date: Jan 2010
Location: Kamloops BC
Posts: 715
Default

Hey Tman where did you end up riding? I almost got out today but I had some things I couldn't get out of...maybe tomorrow.

__________________
HuskyDude
10 EC300XC
08 TE510
07 TXT 280
77 TY175
Reply With Quote
  #19  
Old 04-03-2011, 12:22 AM
Tlineman Tlineman is offline
Senior Member
 
Join Date: Mar 2011
Location: Kamloops, BC
Posts: 118
Default

Dew Drop, past Lac Du Bois PP. Very limited trails but some hills to play on and no snow unless you go high. The trees are spaced enough that a guy can 'freeride' through the area too.
Reply With Quote
  #20  
Old 09-08-2013, 06:47 PM
Pinittowinit Pinittowinit is offline
Senior Member
 
Join Date: Sep 2013
Posts: 104
Default

Here's a cool trick
http://www.youtube.com/watch?v=Kgog_Ng0-2Q&sns=em
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
EC300 Idle Revisited. Ud_luz Enduro Intake/Carburetion - 2 stroke 35 01-07-2011 07:39 PM
Rear wheel spacers revisited. Ud_luz Enduro Chassis & Body 9 09-13-2010 08:01 PM
Zokes oil level? jostby Enduro Suspension 2 06-20-2009 11:29 AM
Fork oil level ? Brian VT Enduro Suspension 4 03-10-2009 08:57 PM
WP Fork Oil Level MattR Enduro Suspension 11 08-02-2006 10:40 AM




All times are GMT -5. The time now is 02:18 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org