Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-31-2010, 04:45 PM
Berkyboy's Avatar
Berkyboy Berkyboy is offline
Site Sponsor
 
Join Date: Jul 2006
Location: Minnesota
Posts: 553
Talking The view from the GasGas factory

As I sit here in my hotel room in Barcelona waiting for my flight back home to the US I can't help but smile.

Most of you know that I just spent the better part of this week at the GasGas factory in Spain and I can tell you and the rest of the world that GasGas is definitely on its way to being seriously considered as one of the best made enduro motorcycles brands in the world.

Since being reorganized in May 2008 and now completely purchased from the original founders Narcis Casas and Josep Pibernat, the company has spent the last two models years remaking itself where it is now a profitable company again making competitive trials and enduro motorcycles.

Under the direction of minority stock holder Ramon Puente the company appears to be on the verge of re-establishing itself again as one of the world's premier off-road enduro motorcycle builders.

While other European enduro motorcycle companies, namely KTM / Husaberg and BMW / Husqvarna, seemed to loose focus during the last couple of years by building sports cars and re-inventing the enduro motorcycle GasGas rolled up its sleeves and went to work on making itself a leaner, meaner off-road motorcycle company investing in and refining its proven technology.

Over the last decade all of the world's off-road motorcycle manufacturers seemed to be following each other down the path of spending most of their R&D money on emerging four-stroke technology, all but abandoning their already successful two-stroke machines.

KTM and BMW made mistakes along the way, both eagerly spending millions and millions of dollars chasing "cutting edge" four stroke technologies that they were sure the world's off-road market wanted, which have now left their warehouses and their dealer's showroom floors often overstocked.

GasGas had its share of problems chasing the four-stroke "Holy Grail" as well, namely by premiering the world's first production off-road EFI motorcycle, the FSE 400, which all but brought the company to its financial knees with reliability problems when it debuted in 2003. That basic design continued having "teething pains," tarnishing GasGas's overall reputation until the FSE it was completely phased out and redesigned in 2007 (FSR.)

The difference is while KTM / Husaberg and BMW / Husqvarna continued to bet big on four-stokes, GasGas cleaned house "cutting its operating overhead" and re-investing in refining it's already proven two-stroke enduro motorcycles. According to Puente that was the whole idea when he took over the reigns in 2008 of the Catalonian (Spain) based off-road motorcycle company.

Puente said it was obvious GasGas was going in the wrong direction when it prematurely put its financial future into four-strokes and so they've made an effort to reinvest in their most successful models, the EC two-stroke line up. Puente said, "We spent the first two years (2008 and 2009) cutting costs trying to be profitable again and last year (2010) we went to work on refining our two-stroke enduro motorcycles.

"While other manufactures start over with their designs every three or four years we went back to work making our already proven designs better." Puente's claim is easy to back up as historically a majority of its two-stroke enduro motorcycle parts are mostly interchangeable over the years with minor improvements and subtle fitment revisions being made every couple of years.

This year's 2011 enduro model's are a testament to that concept as the now distinctly red framed machines, following in the color scheme footsteps of the 2010 GasGas trials motorcycles, have been refined once again.

The 2011 GasGas enduro bikes (for the US market) now come stock with FMF Q-series muffler, re-valved 48mm Sachs front forks (as well as the more traditional 45mm Marzsochi's), a thermostat has been added to the cooling system along with a 1.8 radiator cap (gone is the 1.2 cap and coolant expansion tank), "a grip tape like finish" on all side graphics, new front fender, new headlight, new graphics, engine specific (125cc/200cc/250cc/300cc) power valve actuator assemblies and a two-stroke e-start model that will officially roll off the assembly line sometime in September.

While I may be biased to the GG brand, I've personally been involved with the brand since 1999, I'll have to say that GasGas the company has made an even bigger commitment to future sales this year as they pre-produced nearly nine hundred 2011 motorcycles prior to their three week August break.

That's a big step for a factory that historically delayed the debut of their "new models" by up to 2 to 3 months from the other manufacturers' new model launchings until after the factory opened after the summer holidays in late August.

That commitment, and the continuing refinement to their two-stroke enduro lineup, now seems to have the Girona based motorcycle brand, with the funny name that repeats itself, ready to establish itself as a leader in off-road motorcycles again.

Over the next couple of months you'll hear more official announcements coming from the GasGas factory that are going to get noticed. In confidence I've learned of some very exciting upcoming news that's soon to make off-road headlines worldwide.

And as far as GasGas and their future four-stroke models, don't worry GasGas plans on continuing their popular Yamaha powered FSR250 and their refined FSR450 for another year. Puente assured me that GasGas is planning competitive four-stroke models in the 250 to 450 displacement classes as well but wants to make sure those models are ready before committing to producing them.

When asked about two-stroke direct injection technology, that seems to be just a model year away from the other manufacturers, Puente just smiled with a grin which only caused me to wonder what GasGas is up to.

So what was the view like from the GasGas factory? I would have to say I came away with the same size grin that Puente used when he tried not to respond to my question in the paragraph above.
__________________
Steve Berkner

I've attended 21 Six Days as a working Photojournalist

Last edited by Berkyboy; 01-22-2011 at 06:15 PM.
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
GasGas Factory Racing Rick General Discussions & Announcements 8 04-02-2010 10:19 AM
2002 GG EC 300 General View Questioning mirringues Enduro Engine - 2 stroke 1 11-02-2009 08:10 PM
GasGas Factory Tour webmaster General Discussions & Announcements 11 09-12-2007 12:44 PM
GasGas Factory Visit blitz11 General Discussions & Announcements 4 05-07-2007 12:24 PM
GasGas Factory Team signs Frederic Bolley webmaster General Discussions & Announcements 0 01-24-2007 01:03 PM




All times are GMT -5. The time now is 08:26 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org