Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 09-12-2018, 07:52 AM
Lukeeccles Lukeeccles is offline
Member
 
Join Date: Aug 2018
Posts: 6
Default Power valve oil tube

Hello i have a 2002 ec300 and im running putoline mx9 at 50-1 but my power valve is dripping oil out the tube is this to much oil or is this a good mix for the mx9?


Reply With Quote


  #2  
Old 09-12-2018, 10:05 AM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

They will sponge more if you are jetted rich, but if they are not ridden hard they will sponge even when jetted correctly especially with high flash point oils.
Reply With Quote
  #3  
Old 09-12-2018, 02:10 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

I've Always run 40:1 so 50 is not too much. Jetting will reduce spooge and it's the needle that will make your change. But who cares if there's s bit of drip? It's what it's for. Actually I cable tie mine up and drain it ever so often.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Power Valve vent tube shang Enduro Engine - 2 stroke 8 07-23-2015 07:32 PM
Loss of power - suspect power valve Jonny Halls Enduro Engine - 2 stroke 4 01-22-2013 09:56 AM
power valve nut bonkeye Enduro Engine - 2 stroke 4 10-11-2012 06:40 PM
Power Valve Vent Tube?? EtienneNZ General Discussions & Announcements 16 09-19-2010 09:53 AM
Power valve bens25au Enduro Engine - 2 stroke 2 02-09-2008 11:02 PM




All times are GMT -5. The time now is 05:56 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org