What engine oil are you using?

[juuso*]

Its about time for the first oil change to my -00 ec300. I was wondering which oil should I use? Wet clutch compatible?

[nato]

I use gro. Same brand for premix too. There are quite a few choices but i have stuck with gro cause gasgas said they recommend it.

[AZRickD]

I've used Rotella, both synthetic and dyno.

I've also used pure Walmart ATF as well as a 50/50 blend of ATF and Rotella. Why? I dunno.

I normally use 100% ATF.

[stainlesscycle]

Originally Posted by AZRickD

I've also used pure Walmart ATF as well as a 50/50 blend of ATF and Rotella. Why? I dunno.

sounds like me. i've used them all. currently on rotella... was running 0w-40 amsoil forever, but this bike doesn't seem to mind the rotella. other bikes i've had would have terrible clutch action with it. atf you gotta change more frequently, but i'm changing every 2-4 hours anyways.

[Elvis74]

Motul Trans Oil and nothing else.

[Nick]

The guys oversea's arent going to know about Rotella. Just use a readily available oil that is JASO MA as listed on the bottle and you will be fine.

[swazi_matt]

Belray gear saver

[juuso*]

Havent heard any of those but motul.

[Vindicator]

Motul 7100 10w40, change it every 1000kms . First oil change was at 500Kms

[gassergrant]

Hi mate I use putoline it's a Mx oil you have Fuchs or knowen as silkolene, rockoil make gear oil
These are the main ones I use as long as its 80/90 (10/30)for use with wet clutch, fully synthetic ya can't go wrong
What oils can you get hold of??

Oh castrol too and I've used millers before it was left over from my track car