Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-11-2018, 11:17 PM
AAH AAH is offline
Member
 
Join Date: Mar 2017
Location: Northern NSW Australia
Posts: 10
Default power valve triangle plate

So while trying to undo the nut that holds the link rod in place I have broken the lug off the triangle actuator plate. I'm not sure if I can repair, maybe drill the plate and put a bolt through?
Where are people in Australia buying parts from now that gasgas Australia is no longer the importer. New importer still has no parts site online.
Cheers.


Reply With Quote


  #2  
Old 01-12-2018, 01:14 AM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

Been there done that. What did I do? Think I welded something back in from the back. A while back and a few beers tonight.
Find an old time engineer dude and give him whatever he asks.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #3  
Old 01-12-2018, 06:09 AM
Brian VT Brian VT is offline
Senior Member
 
Join Date: Jul 2006
Location: Vermont, USA
Posts: 827
Default

Many warnings here about that.
For those that haven't heard...torch the nyloc nut to melt the plastic before trying to remove it.
Reply With Quote
  #4  
Old 01-13-2018, 11:13 AM
philm philm is offline
Member
 
Join Date: Jan 2015
Location: Newcastle, Australia
Posts: 93
Default

For parts give Jay at SMW a call.

http://sydneymotorcyclewreckers.com.au/
__________________
2010 GasGas EC300 Nambo
Reply With Quote
  #5  
Old 01-13-2018, 03:51 PM
Nocams Nocams is offline
Member
 
Join Date: Feb 2016
Posts: 83
Default

I think jay has knocked it on the head and is out of the game now.
Close motocycles in marrickville (Sydney) will get the part you require.
Reply With Quote
  #6  
Old 01-13-2018, 09:12 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

The pin is just tack welded into the plate from what I remember. Should be able to have a decent welder do the same for you, making it better than new.
Reply With Quote
  #7  
Old 01-14-2018, 01:38 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

Yeah I used a pretty dreadful welder (me) but its still hanging in there just fine. I had to add a washer so it turned without getting hung up.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #8  
Old 01-14-2018, 03:04 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

I'd probably just blow a hole through the whole tab if I tried.. or spatter it with bird poo...
Reply With Quote
  #9  
Old 01-14-2018, 06:23 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

Ahh. So you know my secret techniques.
Actually I just took my old gasless mig to the tip. I feel much more competent with my new welder. Although I'm yet to spark it up. I've had it over a month. . . Can't believe it. Too much else on.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #10  
Old 01-14-2018, 06:41 PM
barossi73's Avatar
barossi73 barossi73 is offline
Gold Level Site Supporter
 
Join Date: Jan 2014
Posts: 551
Default

Wait until you try alloy...one sec theres a weldpool then "pffft"....gone...all gone...
Quite demoralising if you thought you could weld reasonably with stick and mig...
__________________
2013 ec200r
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ec 300 power valve Jonisaacson17 Enduro Engine - 2 stroke 11 07-18-2016 09:01 PM
Loss of power - suspect power valve Jonny Halls Enduro Engine - 2 stroke 4 01-22-2013 09:56 AM
power valve nut bonkeye Enduro Engine - 2 stroke 4 10-11-2012 06:40 PM
Is this power valve lever plate wrong? mark250ec Enduro Engine - 2 stroke 2 09-06-2011 05:39 PM
Power valve bens25au Enduro Engine - 2 stroke 2 02-09-2008 11:02 PM




All times are GMT -5. The time now is 01:46 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org