Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 04-10-2020, 04:01 AM
rvktm rvktm is offline
Senior Member
 
Join Date: Apr 2014
Posts: 128
Default has any one looked at making the non powervalve governor adjustable

looking at the 018 set up it looks possible


Reply With Quote


  #2  
Old 04-10-2020, 09:21 AM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

I guess it would be possibly. Buy, would be expensive.

You can adjust the earlier power valves, through the internal shims.
Reply With Quote
  #3  
Old 04-11-2020, 03:31 PM
rvktm rvktm is offline
Senior Member
 
Join Date: Apr 2014
Posts: 128
Default

the 015 on. adjustable shaft is only ?15 if it fits all iv got to do make a cap/nut and drill tap out the clutch cover.got a used 98 pv governor of ebay to play with.any one got a 015 on pv gov to hand they can measure the shaft need diameter length slot position / length of slot thanks
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adjustable powervalve anyone? jt633 Enduro Engine - 2 stroke 1 01-28-2014 09:30 PM
Trusty adjustable powervalve cover ? 101racing Enduro Engine - 2 stroke 5 06-03-2009 12:14 PM
Adjustable powervalve cover darren Enduro Engine - 2 stroke 1 01-12-2009 05:27 PM




All times are GMT -5. The time now is 11:55 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org