|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
flywheel weights
question? my 06 300 was sold to me in canada as aDE model,is the flywheel different than on the EC?I was also told that one has a70 watt lighting and the other a 130 watt and you can tell by where the wire comes out of the cover.
any ideas? Dave 50+wornout pnwma racer 06 300 GG ltr suspension,trials tire,tubliss kits f&r,tall seat kit,scotts under bar damper,faastway flexx bars,gnarly pipe,fmf stealth s.a.,lots of duct tape holding plastic and rider together |
#2
|
||||
|
||||
If the wires exit at the 2 oclock position, its a heavy stator, called a 2K3, which makes more juice
If the wires exit at the 10 oclock position, its a lighter stator, called a 2K2, which makes less juice |
#3
|
||||
|
||||
thanx for the reply. Is the weight difference enough to affect the power characteristics of the 300
dave |
#4
|
|||
|
|||
It supposed to be like adding a heavier flywheel, which I did to my lighter. Just as expected it smoothed the bike out but made it a bit slower to rev. Which do you want, the rip or the smoothness. I wouldn't mind switching to the more output/heavier if you are interested in a swap since I could loose the weight and get higher wattage to boot.
__________________
2006 EC300, 2000 XR650R, 2003 EC250, 2001 EC200 (OK, the last two are really my sons). |
#5
|
|||
|
|||
so which ignition do you have? My understanding was that the DE had the 2K2 lighter flywheel, lower wattage setup.
The XC models became DE models when the importer of that era went out of business (or stopped importing, whatever). The differances between my XC and my kids EC is he has the heavier 2K3 ignition, reed spacer, GG pipe and Shivers (mine came with the FMF pipe and WP's). There is a noticeable differance between the two.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
#6
|
|||
|
|||
Quote:
__________________
2006 EC300, 2000 XR650R, 2003 EC250, 2001 EC200 (OK, the last two are really my sons). |
#7
|
||||
|
||||
my 06 has the 2k2 stator judging by where the wire loom exits the cover.it also came with the shivers and the GG pipe.
thanks for the info guys. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
gasgas 250ec flywheel weights | popscycle | Enduro Engine - 2 stroke | 15 | 01-13-2017 08:19 PM |
Real bike weights????????? | Stoby | General Discussions & Announcements | 3 | 09-07-2010 07:26 PM |
flywheel weights kokusan generator | Caravan Monster | All Other Bikes... | 5 | 06-14-2010 11:21 PM |
Flywheel weights | biggstr6 | General Discussions & Announcements | 21 | 03-30-2010 10:54 AM |
Flywheel Weights??? | DAGWOOD1971 | General Discussions & Announcements | 4 | 06-15-2007 11:15 AM |