Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 05-01-2014, 02:54 AM
Diggs345's Avatar
Diggs345 Diggs345 is offline
Senior Member
 
Join Date: Apr 2012
Location: Sunny scunny uk
Posts: 654
Default Chinese rads

Hi all

Has anyone tried the Chinese rads that are on ebay , I need some for my 12 and they are less than half the price of oem ones , any opinions on them would be appreciated .

Chris


Reply With Quote


  #2  
Old 05-01-2014, 03:21 AM
300ECR 300ECR is offline
Member
 
Join Date: Jun 2013
Location: Victoria Australia
Posts: 36
Default

I have had a set in my 08 300 for two years and a pair on a mates 08 450 for one year with no problems. Both sets are from GPI. On the 450 he is also running their silicon hoses again with no problems.
Reply With Quote
  #3  
Old 05-01-2014, 03:24 AM
Diggs345's Avatar
Diggs345 Diggs345 is offline
Senior Member
 
Join Date: Apr 2012
Location: Sunny scunny uk
Posts: 654
Default

Thanks for the reply pal
Reply With Quote
  #4  
Old 05-01-2014, 07:57 AM
Selvagem Selvagem is offline
Member
 
Join Date: Aug 2012
Location: Brasil
Posts: 80
Default

I've installed a couple of them in my EC 250 2008 for more than a year, so far no problem.

OEM:



Chinese Rads:

__________________
GasGas EC 250 2008
Equipped KYB SSS Fork.
Reply With Quote
  #5  
Old 05-01-2014, 10:44 AM
desertgasser300 desertgasser300 is offline
Banned
 
Join Date: Feb 2011
Location: Hot A@% desert AZ.
Posts: 1,872
Default

I ended up buying a set for my 12' 300. They are doing the job well. The oem cap didn't not fit and the one it came with was 1.1 bar. I found that a cap from a 13' KX450F will fit, you can find those in a 1.8 bar.
Reply With Quote
  #6  
Old 05-03-2014, 01:58 AM
Diggs345's Avatar
Diggs345 Diggs345 is offline
Senior Member
 
Join Date: Apr 2012
Location: Sunny scunny uk
Posts: 654
Default

Cheers for the info guys ,
Reply With Quote
  #7  
Old 05-03-2014, 02:02 AM
Diggs345's Avatar
Diggs345 Diggs345 is offline
Senior Member
 
Join Date: Apr 2012
Location: Sunny scunny uk
Posts: 654
Default

Quote:
Originally Posted by desertgasser300 View Post
I ended up buying a set for my 12' 300. They are doing the job well. The oem cap didn't not fit and the one it came with was 1.1 bar. I found that a cap from a 13' KX450F will fit, you can find those in a 1.8 bar.
Did you get the ones listed as 12/13 rads , for some reason they cost more and I'm sure I read on here somewhere the 11 and 12 rads are the same
Reply With Quote
  #8  
Old 05-03-2014, 02:08 AM
wence's Avatar
wence wence is offline
Bronze Level Site Supporter
 
Join Date: Nov 2008
Location: Adelaide South Australia
Posts: 1,159
Default

I installed some on my 12 but had to modify both sides of each radiator brace as the chinese rads are wider and deeper.
All good so far , touch wood.
Cheers Mark
__________________
Xr 250 ( first bike)
98 Rmx
2007 Gas gas 300(swapped for trials bike)
2008 280 Raga replica
2012 Gas gas ec 300 E
Reply With Quote
  #9  
Old 05-03-2014, 06:44 AM
spooly's Avatar
spooly spooly is offline
Senior Member
 
Join Date: Mar 2014
Posts: 308
Default

ebay. .Link? ?

Sent from my GT-I9300 using Tapatalk
Reply With Quote
  #10  
Old 05-03-2014, 09:44 AM
wence's Avatar
wence wence is offline
Bronze Level Site Supporter
 
Join Date: Nov 2008
Location: Adelaide South Australia
Posts: 1,159
Default

http://www.ebay.com.au/itm/280702056...84.m1423.l2649
__________________
Xr 250 ( first bike)
98 Rmx
2007 Gas gas 300(swapped for trials bike)
2008 280 Raga replica
2012 Gas gas ec 300 E
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Chinese Radiators 2002 EC200 mlyle11 Enduro Engine - 2 stroke 17 07-06-2019 08:06 AM
oversize rads britishgas Enduro Engine - 2 stroke 1 01-13-2014 12:02 PM
Blocked Rads? Tigger52 Enduro Engine - 2 stroke 5 12-21-2013 08:46 AM
Crossover-KTM Rads ? husley General Discussions & Announcements 2 04-10-2011 07:28 PM
are gasgas 2t and 4t rads the same? flybars Enduro Chassis & Body 1 03-08-2007 09:47 PM




All times are GMT -5. The time now is 06:37 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org