Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 09-24-2018, 06:34 AM
Wypipo Wypipo is offline
Senior Member
 
Join Date: Sep 2018
Posts: 131
Default 2018 choke

Has anybody modified the choke on a 2018? Some dirt got in between the lever and where it seats and was causing issues. Wondering what my options are


Reply With Quote


  #2  
Old 09-24-2018, 06:46 AM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

Delete the cable operated choke.
Reply With Quote
  #3  
Old 09-24-2018, 07:22 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

Something like this:

https://www.ebay.ie/itm/New-Keihin-C...wAAOSwU9xUSEya
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #4  
Old 09-24-2018, 08:43 AM
Wypipo Wypipo is offline
Senior Member
 
Join Date: Sep 2018
Posts: 131
Default

Quote:
Originally Posted by gasgasman View Post
Delete the cable operated choke.
So take it out completely and run with no choke? Or delete and replace?
Reply With Quote
  #5  
Old 09-24-2018, 09:26 AM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,838
Default

Replace cable choke with typical plunger type choke.

I actually enjoyed the cable choke but had to delete it due to the Lectron swap.
Reply With Quote
  #6  
Old 10-02-2018, 07:07 AM
Wypipo Wypipo is offline
Senior Member
 
Join Date: Sep 2018
Posts: 131
Default

Quote:
Originally Posted by Anders View Post


Is there a specific model I need to get or can I get any choke plunger for a PWK 38mm ? Is there anything else that needs to be done internally to the carb other than unscrewing the old one and screwing in The new one?
Reply With Quote
  #7  
Old 10-02-2018, 07:47 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Current model YZ250 does the trick, but any from the same family of Keihin carbs will work.

14mm open ender, take out the old one, drop in the new one.
Reply With Quote
  #8  
Old 10-03-2018, 02:09 AM
shawbagga's Avatar
shawbagga shawbagga is offline
Senior Member
 
Join Date: Feb 2012
Location: West Straya
Posts: 225
Default

2019 GG back to plunger!
__________________
'18 Gasgas XC250
Reply With Quote
  #9  
Old 10-26-2018, 11:00 PM
dzhitshard dzhitshard is offline
Member
 
Join Date: Sep 2018
Posts: 72
Default

My OEM choke has been a frustration since I got the bike. I had to return the lever all the way forward with my finger any time the lever was moved. Super frustrating a handful of times when shrubs grabbed it while I was boon docking around deadfalls from our recent heavy wind storms.

I went to take it off and put a standard plunger type on and was halfway through the process today when I realized I was missing a proper bushing to use my Magura clutch bolt from a 2018 Husky and I didn't have time to make one toda.

In the process of reinstalling the OEM choke lever I realize it was installed wrong from uncrating. When I put it back on it is spring loaded and goes back to the closed position when you release your finger.

I think I'm going to try it like that for a while and see if I can live with it now. Before it was very frustrating to me when I'd have to manually close it.
Reply With Quote
  #10  
Old 10-27-2018, 02:17 AM
(F5)'s Avatar
(F5) (F5) is online now
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,063
Default

1/2 your luck. I have a 2017 carb on my oldie which has the cable but nothing to connect to. I only use it once a day but pulling the end of a cable, whilst easy looks a little naff and I long for a lever like my mates have.

Grass is always greener huh?
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2018 - cable to plunger choke Gibnut Enduro Intake/Carburetion - 2 stroke 0 03-17-2018 12:20 AM
Choke replacement Mostin3 Enduro Intake/Carburetion - 2 stroke 8 12-08-2017 07:17 PM
Handle bar choke Biff Enduro Intake/Carburetion - 2 stroke 4 06-16-2012 09:53 PM
choke cable help???? nambo-trev Enduro Intake/Carburetion - 2 stroke 2 08-27-2010 09:23 AM
Cable choke for 03 250? marjastaja Enduro Intake/Carburetion - 2 stroke 3 02-28-2010 09:45 AM




All times are GMT -5. The time now is 01:10 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org