will 2019 map switch fit 2018

[Undertow]

Well, now we have mixed signals from GG. One technician says it works, one says it doen?t.

The easiest way to check is loop pins 4 and 13 in the connector and see what happens

The wiring plan is the same in the connector between 18 and 19, so no harm should come, even if the ECU program doesn?t support this, right

[gasgasman]

You risk shorting out the module.

[GASGASCWB]

Originally Posted by gasgasman

No.
According to the GG tech, if the '18 CDI supported the MAP switch, they would have added it.
You can buy a '19 CDI and add the switch.

Exactly what I think!

IF it worked, it would not be only the selector switch that would make a difference...

[GASGASCWB]

Originally Posted by gasgasman

You risk shorting out the module.

In my humble opinion, I do not think such changes are worth taking the risk!

The 2018 models already have many electrical problems but have gradually been solved...

These "adaptations" are a potential problem!

If it was just buy the selector switch and plug it in according to the diagram, ok!

But if the CDI's are different (see my post above with the 2018/2019 PN's), you will not be putting the key or just changing the position of the pins that we would get the SUN and RAIN maps with some safety for the motorcycle's electronic / electric system!