|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
08 ec 300 vibration
does the 300 normaly have alot of vibration mine seems to.
|
#2
|
||||
|
||||
Some say they're really smooth. Mine is personally a real buzzer. Handlebars, footpegs, seat..
You can check the engine mounts etc to make sure its not something simple. Other than that a good balancing of the crank will smooth things right up. When are you splitting the cases next? |
#3
|
||||
|
||||
my 07 vibed a bit, but not bad. - when i rebuilt the crank, the flywheels were significantly out of alignment of each other ( like .008"? from memory).. gettign rid of that issue helped significantly.. also make sure all mounts are torqued - especially swingarm pivot. once one mount loosens, all the rest follow very shortly.
__________________
07 ec300 was 00 xc200 now a 00 xc300. now parting out. 99 ec300 (now a pile of parts which are for sale) Stainless Cycle - Motorcycle Bolt Kits www.stainlesscycle.com |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
vibration fix. | stainlesscycle | Enduro Engine - 2 stroke | 2 | 02-22-2012 07:49 AM |
vibration | peanutsracing1 | Enduro Chassis & Body | 3 | 04-19-2011 08:55 PM |
Vibration | mikeh | Enduro Engine - 2 stroke | 2 | 04-21-2010 04:18 PM |
Excess Vibration | case-racing | Australia & New Zealand | 3 | 05-30-2009 11:22 PM |
foot peg vibration | MIKEWA | Enduro Chassis & Body | 3 | 03-19-2007 08:42 PM |