Complete Rebuild - EC250

[RockefellerGG]

Remove the two bolts holding on the shaft block and remove the assembly:




Lift out the centrifugal mechanism:


Lift the kick start return spring out of the hole and release the tension:


Remove the starter pinion circlip:


Lift out the inner starter pinion and spacer washer:


Lift out the Starter pinion assembly:


Remove the gear selector spring:


Lift the gear selector unit straight out of the case. Mine didn't come out too easily. It got tighter the further out i pulled it. There is a small white plastic bushing under it. Don't forget to grab it.


Remove the spring from the hole and remove the bolt that holds in the gear lock: