|
|
|||||||
| Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
 |
|
|
Thread Tools | Display Modes |
|
#1
10-10-2016, 01:02 PM
|
|||
|
|||
Won't start in gear
My 300EC won't kickstart when in gear. Is this normal? Do we know if they have some sort of cut out mechanism to prevent this? And if so can it be bypassed? Thanks.
|
|
#2
10-10-2016, 02:20 PM
|
|||
|
|||
|
Probably find its a bit of clutch drag, what age bike? Dunno if the electric starts have a clutch switch that might be faulty?
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450
|
|
#3
10-11-2016, 08:34 AM
|
|||
|
|||
|
Mine doesn't like to start when in gear, certainly 1st or 2nd. If you are rolling it will start but that's obviously not always an option. I put it down to clutch drag.
|
|
#4
10-11-2016, 09:42 AM
|
|||
|
|||
|
I don't think any of my dirt bikes, starting with my old yz80 when I was a kid, didn't like to start in gear. It's just drag on the clutch.
__________________
2013 GasGas XC300E 2005 YZ290 1973 Honda CB175 1997 KX60 1983 Yami Tri-Zinger 1984 Suzuki Alt 50 1969 Trail 90 1971 Trail 90 1972 Trail 90
|
|
#5
10-11-2016, 01:41 PM
|
|||
|
|||
|
Thanks, I'll see if anything can be done to fine tune the clutch 👍
|
|
#6
10-11-2016, 02:49 PM
|
|||
|
|||
|
Look for a grooved clutch basket. This will not allow the plates to separate.
__________________
Matt 1999 GG EC 250 Six Days 1999 Cagiva Gran Canyon 2001 Aprilia Falco 2001 Triumph Speed Triple for my 20 year old 2000 GG XC250 for my 20 year old 2003 Honda Rancher 350 for the wife
|
|
#7
10-11-2016, 05:00 PM
|
||||
|
||||
|
As above.
You can also try pulling the clutch in and giving the bike a rock back and forwarth to free the plates up before putting your boot into it. No issues here with starting in any gear, once up to running temps.
|
|
#8
10-12-2016, 07:32 AM
|
|||
|
|||
|
Quote:
Mine doesn't like to start in gear when cold. After it's warmed up, no issues.
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| WTB 2014 e-start ring gear | dANbOT | "Wanted to Buy" & "Want To Trade" | 0 | 07-12-2015 08:36 AM |
| Kick Start Gear Cluster Assembly or (Starting Pinion and Rachet Pinion) | Zman | "Wanted to Buy" & "Want To Trade" | 4 | 10-31-2014 11:18 AM |
| Wanted!! Ec200 seat, radiators, switch gear, gear lever | Kendog | "Wanted to Buy" & "Want To Trade" | 2 | 10-12-2014 03:12 PM |
| Gear oil .... | Packman | Enduro Engine - 2 stroke | 11 | 05-15-2013 05:47 PM |
Linear Mode
