|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Weak front brake 04 ec300
Hey guys have a front brake question, ive put new pads on bled them every way possible but the feel at the lever is weak they work about 75% better once warm but i like my front brake super strong do i need to rebuild the master cyl or the caliper? Pretty sure my last gasser had a honda crf front brakr setup thanks in advance
|
#2
|
||||
|
||||
Sounds like you have air in the system. Did you try to bleed the brakes? One quick method is to push the caliper pistons back in the caliper and it will force some (maybe all) air back through the master cylinder and into the fluid reservoir. Sometimes it works sometimes it does not.
|
#3
|
|||
|
|||
Yes like i said i tried everything would like to save some money if i dont have to buy both kits
|
#4
|
||||
|
||||
Get a zip tie and pull the lever as far back as possible. put the zip tie on around the bar and lever let sit over night.
__________________
02 EC 200 03 MC 250 88 VT 800 01 TXT 280 |
#5
|
|||
|
|||
With bleeder cracked? Also what other bikes have same master and caliper? I know japs are the same but need a year or years lol
|
#6
|
||||
|
||||
The zip tie trick works, but the trapped air rises to the highest point of the brake system. ie usually the loop in the hose. raise the resevoir or lower the caliper.
__________________
15 GASGAS EC 250 19 Sherco SE 125R |
#7
|
||||
|
||||
Quote:
Any year XR400 front and back
__________________
02 EC 200 03 MC 250 88 VT 800 01 TXT 280 |
#8
|
|||
|
|||
How is the air released? If theres no escape for it
|
#9
|
||||
|
||||
It just goes into the master cylinder try it it mite help mite not but it is free
__________________
02 EC 200 03 MC 250 88 VT 800 01 TXT 280 |
#10
|
|||
|
|||
I got it zip tied right now thanks for the tip!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front Brake Mod | GasGas | Enduro Chassis & Body | 3 | 09-19-2013 06:33 PM |
weak spark | tallboy350 | Enduro Electrical & Wiring | 5 | 11-24-2008 08:18 PM |
weak spark?? | Cruiser | Enduro Engine - 2 stroke | 11 | 07-01-2007 02:26 PM |
Front Brake Lever | cladoo | Enduro Chassis & Body | 4 | 02-07-2007 08:45 AM |