|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
I have a 1998 EC250 Does anybody have the stock settings for the rear ohlins on this year bike.
Also i set the preload on the rear spring to 8mm on checking the static sag it measured up at 40 mm. the spring has some numbers on it but they dont mean a lot to me. The numbers are 596-09/05 088 I weigh about 170 lbs If i wind down the preload to get 15mm static sag then the spring ends up 3/4 way down the thread well under the thread center line. Any body help? |
#2
|
|||
|
|||
Does the low speed have to be re-adjusted on the ohlins after moving the high speed, or just the sachs?
|
#3
|
|||
|
|||
Does anybody know the stock / the best settings for a 2003 EC 300? It has got the Marzocchi fork an the Öhlins damper.
|
#4
|
|||
|
|||
Hi all. This may have been posted but there's a lot to go through on this thread I. Looking for any info on setting up a 1998 ec250. Ohlins rear. Zoke 44mn front. Prevowner had heavier springs installed. He's about 250 or so lbs. I am 203 out of the shower I they should work. But is the standard 100ish mm sag for rear applicable? What about front? And clicker settings? No racing. No track or large air. I am a backwoods single track rider. Rocky British Columbia single tracks.
Sent from my iPhone using Tapatalk |
#5
|
||||
|
||||
Quote:
__________________
2018 EC 300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gas Gas EC 300 09 Basic Suspension Settings | snaissidis | Enduro Suspension | 0 | 03-16-2009 04:05 PM |
2005 baseline settings | stay_upright | Enduro Suspension | 0 | 01-26-2009 08:37 AM |
450 fork settings? | splint | Enduro Suspension | 0 | 10-14-2008 03:30 AM |
baseline ohlins setting | fullthrottle | Enduro Suspension | 5 | 04-26-2008 08:15 AM |
EC300 Baseline settings | Magellan | Enduro Suspension | 7 | 08-26-2006 06:30 AM |