|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Instrument power? Trail Tech Vapor
Hey,
I'm changing the clocks on my 2001 EC 300. I've taken off the old Hebo clocks, and attempted to fit a trail tech vapor. I've got the tacho, rpm and temp wires all hooked up, the problem is power to the vapor unit? Any potential connectors dont match up, the vapor has a much newer smaller conector with two terminals: I have one conector with two terminals (two wires, orange and black) And another with three terminals (three wires, blue, white, red) Are any of these wires likely to be the power to the clocks unit, does the OEM Hebo unit require power? Thanks |
#2
|
||||
|
||||
I just spliced mine into the headlight circuit. My old Hebo unit was battery only.
__________________
2004 GasGas DE250 |
#3
|
|||
|
|||
There should be a power wire supplied with the kit that hooks to the 2 terminal connector...then you run those wires to the battery...or wherever you plan to get power from
__________________
2006 Gas Gas EC300 2T |
#4
|
|||
|
|||
Thanks guys.
Turned out trail tech also recommended splicing the provided power cable into the loom... |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
08' trail tech speedo help please. | nick790 | Enduro Electrical & Wiring | 5 | 09-06-2015 11:51 AM |
trail tech vapor for 2011 ec 300 | mudwasp | Enduro Product Reviews | 11 | 05-20-2012 02:48 PM |
Trail tech troubles | skid jackson | General Discussions & Announcements | 8 | 06-02-2010 07:15 PM |
Trail Tech X bars | sammyj18 | Enduro Chassis & Body | 11 | 05-06-2010 09:39 AM |
Trail Tech Vapor | DAVe3283 | Enduro Product Reviews | 6 | 03-07-2007 06:33 PM |