Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-20-2013, 12:02 PM
nkd2883 nkd2883 is offline
Member
 
Join Date: Feb 2013
Posts: 2
Default 1999 EC250 Fair Price?

Greetings all,

I'm new to the site. I arrived here last night while doing a bit of research on a bike I'm looking at. I'm located in the Tampa, FL area.

So I found a 1999 GasGas EC250 that is tagged and registered for the street. It has ~750 miles on the odometer and supposedly hasn't really gotten much use in the past 14 years. As far as I can tell there are no issues with the motor, compression seems fine and during a test-drive there was nothing unusual in terms of the powerband. The only thing that is wrong with it is brake light switch in the rear master cylinder. I bought a new switch for $47 and can install that myself.

Here is a link to the bike in a craigslist advert, all the relevant information about the bike and photos are here:

http://tampa.craigslist.org/pnl/mcy/3578811317.html

So I could purchase the bike for $2400 but I get the feeling that that price is a fair bit higher than it should be. I really do love the bike... I ride a GSXR right now and I was thinking of picking this up as a second bike.

So my question is do you all think that $2400 is much higher than should be payed for it? If so I can always wait and bide my time and perhaps hope someone on this Forum sells something like it soon

So what does everyone think?

Thanks,
-Nathan


Reply With Quote


  #2  
Old 02-20-2013, 12:32 PM
CDBiker220 CDBiker220 is offline
Senior Member
 
Join Date: Nov 2010
Posts: 119
Default

Just for reference I'm planing on asking $1700 for my 2000 GasGas 250 in similar condition. Only its not plated. I dont think I'll get much more than $1500 for it. So yes that seems high. Maybe for it being plated I'd pay a little extra. Say $1800 - $2000 but thats about it.
Reply With Quote
  #3  
Old 02-20-2013, 12:54 PM
nknudsen's Avatar
nknudsen nknudsen is offline
Senior Member
 
Join Date: Oct 2012
Location: SE Minnesnowta
Posts: 722
Default

Last fall I picked up a 2000 EC250 with MN. title. It was shipped up from Smackover when new to MN. It's in very nice condition still wearing the factory Michelin tires at that time. I paid $1700 for it. I was fine with the price because it was a street legal 2 stroke enduro. I always wanted another titled dirt bike since I sold my 00' XR650r in 04'. The GG does every thing better except highway travel. Good luck in your search!

Noah
Reply With Quote
  #4  
Old 02-20-2013, 01:15 PM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,930
Default

Yes, $2400 seems a bit high for a 99 EC 250. Try Kelly Blue Book just for kicks!
__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
Reply With Quote
  #5  
Old 02-20-2013, 02:05 PM
desertgasser300 desertgasser300 is offline
Banned
 
Join Date: Feb 2011
Location: Hot A@% desert AZ.
Posts: 1,872
Default

Don't look at kbb or nada if you already bought it, you will be upset.
Reply With Quote
  #6  
Old 02-20-2013, 02:35 PM
nkd2883 nkd2883 is offline
Member
 
Join Date: Feb 2013
Posts: 2
Default Not yet

No, I haven't purchased it yet. And given the recommendations here I'm leaning toward waiting for a better deal to emerge in the future sometime.

-Nathan
Reply With Quote
  #7  
Old 02-20-2013, 03:47 PM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,930
Default

Here...read this thread! http://www.gasgasrider.org/forum/showthread.php?t=14157

It apprears to be a very clean bike, very much the way it rolled off the show room floor back in 99.

The issue seems to be the high asking price...

If your going to dual sport that thing, since it is plated, then it might be a good buy. If your going to race it in hare scrambles and enduro, then it will be a bit dated. Regardless, a soild machine and looks to be taken care of!

Good luck!
__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
Reply With Quote
  #8  
Old 02-20-2013, 10:56 PM
Cruiser Cruiser is offline
Senior Member
 
Join Date: Jul 2006
Location: Jim Thorpe Pa
Posts: 1,280
Default

Thats high. I had my 97 up for $1k and had just tire kickers.. Its street plated but up in Pa.. and has the CB motor so almost no vibrations and the big 180w lighting coil and $1k was hard to pull..
__________________
Steve
16 Beta 350rr
04 KTM 525 sx/exc gone
03 KTM 625 sxc-rehab unit-did its job and now gone
03 GG 250 ec-gone
97 GG 250 ec Gone
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
1999 ec250 Sr412 Enduro Engine - 2 stroke 2 11-20-2012 10:27 PM
2008 EC300 for $3000 a fair price? BluegassXCR General Discussions & Announcements 4 09-29-2011 10:22 AM
Gas Gas XC300 e-start Fair Price? wild-billwjs General Discussions & Announcements 9 03-18-2011 10:51 PM




All times are GMT -5. The time now is 02:01 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org