Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-25-2014, 12:46 PM
Niall-griffiths's Avatar
Niall-griffiths Niall-griffiths is offline
Gold Level Site Supporter
 
Join Date: Feb 2014
Location: Bury st Edmunds (Suffolk)
Posts: 123
Default Brake caliper bolt snapped

Came home and as i pulled onto the drive my rear brake caliper was loose and locked the back wheel up/ lucky i got home and wasent riding still. the fixing (not sure what its called) inbetween the swingarm and wheel what the top caliper bolt screws into must of been cracked and has broken off and nowhere to be seen. where can i get one from or would one of a 250 like this fit?

http://www.ebay.co.uk/itm/Gas-Gas-EC...item2ecefec51c

Bike is a 2002 ec 300


Reply With Quote


  #2  
Old 02-25-2014, 02:06 PM
pscook's Avatar
pscook pscook is offline
Platinum Level Site Supporter
 
Join Date: Oct 2011
Location: Shoreline, WA
Posts: 1,164
Default

200/250/300 are the same chassis from what I have read, so any frame/chassis/brake bits should swap right over.
__________________
Phil
(New bike pending...)
Reply With Quote
  #3  
Old 02-25-2014, 02:46 PM
Niall-griffiths's Avatar
Niall-griffiths Niall-griffiths is offline
Gold Level Site Supporter
 
Join Date: Feb 2014
Location: Bury st Edmunds (Suffolk)
Posts: 123
Default

Quote:
Originally Posted by pscook View Post
200/250/300 are the same chassis from what I have read, so any frame/chassis/brake bits should swap right over.
Hi mate thanks for that. D u know what the part I'm talking about is called so I can give seller details easily ??
Reply With Quote
  #4  
Old 02-25-2014, 05:37 PM
cbutler's Avatar
cbutler cbutler is online now
Senior Member
 
Join Date: Mar 2009
Location: Hot Springs AR
Posts: 710
Default

A pic would be helpful
__________________

02 EC 200
03 MC 250
88 VT 800
01 TXT 280
Reply With Quote
  #5  
Old 02-25-2014, 06:21 PM
pscook's Avatar
pscook pscook is offline
Platinum Level Site Supporter
 
Join Date: Oct 2011
Location: Shoreline, WA
Posts: 1,164
Default

My guess from your description is that it's the caliper bracket. It has a slot in it to hang on the swingarm tab as well as a hole for the rear axle. It acts as the wheel spacer as well as caliper bracket.

If it looks like this, then you have a part number as well.

http://www.gasgasrider.org/forum/sho...26&postcount=7

Entire thread here:
http://www.gasgasrider.org/forum/sho...racket+caliper
__________________
Phil
(New bike pending...)
Reply With Quote
  #6  
Old 02-26-2014, 12:49 PM
Niall-griffiths's Avatar
Niall-griffiths Niall-griffiths is offline
Gold Level Site Supporter
 
Join Date: Feb 2014
Location: Bury st Edmunds (Suffolk)
Posts: 123
Default

Thanks thats what im after dont know why it snapped it seemed fine before had alot of stones hitting the bike from being pebble dashed tho.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brake caliper help! yourmatedave Enduro Chassis & Body 5 05-18-2013 04:40 AM
Brake caliper kits cladoo Enduro Other... 2 04-19-2012 06:47 AM
Rear Brake Caliper blitz11 Enduro Chassis & Body 11 10-28-2008 03:38 PM
TrailTech speedo -- brake caliper whole outside the arc AZRickD Enduro Electrical & Wiring 17 07-30-2008 12:13 AM




All times are GMT -5. The time now is 08:12 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org