Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 05-22-2016, 07:57 AM
doutsh doutsh is offline
Member
 
Join Date: Jun 2014
Posts: 26
Default Catalog number needed - bolt between main and sub frame

Hi,
In my 125 (and I think it's the same at least in all 2 strokers) the subframe is attached to the frame on the bottom side with 2 bolts + nuts + special washers from each side.
I can't seem to find these parts in the microfiche...
I need the nut side, it's a special nut with 10mm head and long spacer attached to it.
Thanks!


Reply With Quote


  #2  
Old 05-22-2016, 10:01 AM
cbutler's Avatar
cbutler cbutler is online now
Senior Member
 
Join Date: Mar 2009
Location: Hot Springs AR
Posts: 707
Default

T2108001 is the nut looks to be the same from 01-11

this is the parts fiche from GoFasters just put in the year.


http://partsfinder.onlinemicrofiche....?make=gasgasdb
__________________

02 EC 200
03 MC 250
88 VT 800
01 TXT 280
Reply With Quote
  #3  
Old 05-22-2016, 10:23 AM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

The nut is slimmer than a conventional nut, so it will clear the swingarm.
If you can't find one, maybe grind the conventional nut down.
Reply With Quote
  #4  
Old 05-23-2016, 11:06 AM
doutsh doutsh is offline
Member
 
Join Date: Jun 2014
Posts: 26
Default

Thank you for the help, but I don't think it is the same part.
In the 2013 the nut comes with some kind of spacer, something like this:
Attached Images
File Type: jpg Untitled.jpg (5.6 KB, 26 views)
Reply With Quote
  #5  
Old 05-23-2016, 12:26 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

That's a Rivnut. It is not serviced separately. Not to say you can't replace it.
You can buy the Rivnuts and replace them yourself. They do require a special tool for the installation.
Reply With Quote
  #6  
Old 05-26-2016, 07:04 AM
doutsh doutsh is offline
Member
 
Join Date: Jun 2014
Posts: 26
Default

I don't think it's a rivnut
I found the part (or similar) at haines, but don't write the catalog number, and they charge 10 pounds before shippment!
This is the part:
Attached Images
File Type: jpg subframe nut.jpg (31.8 KB, 18 views)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
no frame number??? leeroybrown9 Enduro Chassis & Body 2 07-23-2013 03:33 PM
main bearing failure right side 2006 ec300, rebuild tips needed. hillbilly Enduro Engine - 2 stroke 11 03-16-2012 04:42 PM




All times are GMT -5. The time now is 02:09 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org