GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 05-16-2019, 06:09 PM
andrius7 andrius7 is offline
Member
 
Join Date: Feb 2019
Posts: 9
Default fse450 clutch

hi all again, just did cutch replacement, but stopped at tightening 3 springs.. any one knows how hard should i tighten them ?


Reply With Quote


  #2  
Old 05-17-2019, 12:06 AM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 281
Default

10-12nm for the 6mm bolts
__________________
Back on a gassy! 2018 EC300! 🤘
Reply With Quote
  #3  
Old 05-17-2019, 01:39 AM
andrius7 andrius7 is offline
Member
 
Join Date: Feb 2019
Posts: 9
Default

thank you
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
09 fse450 engine head / cams / clutch / gearbox etc BSM2 Parts 3 08-14-2015 05:48 AM
FSE450 fan vwboomer Enduro Electrical & Wiring 3 06-04-2010 11:13 AM
FMF Q on FSE450 McGuiver Enduro Engine 4 stroke (including EFI & Exhaust) 24 08-08-2008 11:22 PM




All times are GMT -5. The time now is 08:32 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org