GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


Reply
 
Thread Tools Display Modes
  #11  
Old 11-04-2019, 12:04 AM
Hooligan Hooligan is offline
Member
 
Join Date: Aug 2014
Posts: 34
Default

Quote:
Originally Posted by (F5) View Post
Mate has just done with YZF450 forks and it is good when travel is being used but too 'everything' most of the rest of the time.
I am contemplating swapping a set of YZ KYBs into my 2010 EC250. Any ideas if the YZ steering stem is compatible with the GasGas steering head? I'd assume at least a bearing swap will be required.


Reply With Quote


  #12  
Old 11-04-2019, 04:38 AM
Anders's Avatar
Anders Anders is online now
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 773
Default

Quote:
Originally Posted by Hooligan View Post
I am contemplating swapping a set of YZ KYBs into my 2010 EC250. Any ideas if the YZ steering stem is compatible with the GasGas steering head? I'd assume at least a bearing swap will be required.
This question is covered here
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #13  
Old 11-04-2019, 02:46 PM
swazi_matt swazi_matt is offline
Senior Member
 
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,034
Default

what i did with mine was got a second top t-clamp and had it machined out by a mm or 2.
I also retained the GG wheel by getting special spacers made to accept the yz axle

I believe all balls has a bearing conversion kit if you want to use a full yz front end
__________________
2010 ec 300
Reply With Quote
  #14  
Old 11-05-2019, 01:10 AM
Elvis74 Elvis74 is offline
Senior Member
 
Join Date: Jan 2007
Location: Good Old Germany
Posts: 788
Default

I have a 2006 KYB SSS fork in the original gasgas tripple clamps. I machines them as well. I put the original gasgas wheel with special made spacers in fits without problems


Gesendet von iPhone mit Tapatalk
__________________
4 strokes are only good for power generators
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
fork clamp bolts and fork oil level gassergrant Enduro Suspension 2 02-16-2016 05:08 PM
not all 5 wt fork oil is the same! matt_tidball Enduro Suspension 3 04-25-2012 07:21 AM
Fork oil?????????? Wicitup Enduro Suspension 3 02-15-2012 11:53 PM
fork seal change sachs fork Madhead Enduro Suspension 13 01-13-2012 08:49 PM
LTR fork Oil PEB Enduro Suspension 5 09-10-2008 09:07 AM




All times are GMT -5. The time now is 08:28 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org