|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Can anybody identify these bits?
Hi all
I picked up my brand new EC300 (2012 model) a couple of weeks ago, and the dealer forgot to give me the key as well as a bag full of other stuff. Well I picked all the extra stuff up today. Great to see a half decent bum bag, dodgy OEM tool kit, and a spare rear sprocket but along with that there is a load of stuff that I don't recognise - I have no idea what it is! So naturally I am appealing to the genius of gasgasrider to help me identify these items.... 7 in all..... attached are some pics. It's worth noting that the bike was delivered in full road trim, i.e. indicators, mirrors etc. all fitted. TIA for any help you can give me Cheers Jerry |
#2
|
||||
|
||||
1&2 are the airbox restricters. The others not sure.
Hopefully you have the chrome front pipe fitted. You will need to change the stock needle as well Biff |
#3
|
|||
|
|||
The first is the airbox restrictor for guys that want to insult the engineers that worked painstakingly to produce the GG
3 looks like a kill switch bracket 5 is to replace your cable choke with choke on the carb ( recommend doing this before it starts playing games with your jetting and ruining rides) Can't see the others clearly
__________________
2003 txt250 Pro 2013 Ossa 280i |
#4
|
|||
|
|||
4 looks like sponge so may be part of the airbox restrictors
__________________
2003 txt250 Pro 2013 Ossa 280i |
#5
|
||||
|
||||
4 I believe are stuffers for the 2012/2013 airbox vents. The rest as Matt said, including fitting the manual choke knob and getting rid of the cable pull.
|
#6
|
|||
|
|||
Thanks guys.
Biff - yes, chrome exhaust fitted, but I think the jetting is still factory stock. Jakobi - when might I want to use the airbox stuffers?? Swazi - good call on the kill switch bracket, I have the kill switch in the pack too, just checked and yes that's exactly what it is! So, only numbers 6 and 7 still to identify........ What's the deal with the handlebar mounted choke then - do they tend to stick on or something?? Cheers, Jerry |
#7
|
||||
|
||||
No idea re where they go. I've never seen a 2012/13 in person but sure I'm read it somewhere. Have a look in the airbox. Are there any holes the same size as the foam?
The cable mounted choke is just unneccessary. Its something you use once a day for all of 20-30seconds. Its got no place on the bars. If the cable sticks it'll play with your fuel mix, or if you ride tight singles, the last thing you need is a vine to pull the choke wide open. Speaking of which, if you haven't yet, make sure you tie wire the throttle cable at both ends. |
#8
|
|||
|
|||
7 looks like part of the roller in the power valve assembly. I think 6 may be something to do with pv also.
|
#9
|
||||
|
||||
#6 is a throttle limiter that fits into the carb cap to keep the throttle from opening past 1/2 throttle.
|
#10
|
||||
|
||||
What is the point of the air box baffles and throttle stop on these? Is it some weird Spanish regulation?
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
help me identify these parts! | Jeremyxc300 | Enduro Chassis & Body | 15 | 05-28-2013 06:58 AM |
2012 bolt on bits. | nato | General Discussions & Announcements | 9 | 08-11-2012 02:37 AM |
Help Identify fork springs? | Harry | Enduro Suspension | 2 | 02-19-2011 09:07 PM |
Newb needs help to identify | williecoyote | General Discussions & Announcements | 4 | 01-05-2008 10:05 AM |