Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-31-2019, 09:32 AM
GG221 GG221 is offline
Member
 
Join Date: Mar 2019
Posts: 80
Default Trouble shifting into 2nd

I am having lots of trouble shifting from 1st to 2nd or from neutral to 2nd. Almost feels like the shift lever is stuck when I try to shift. It is fine shifting throughout the rest of the gear range, and fine when shifting down into 2nd from 3rd. I am using rotella T4 15-40. Could it be a mechanical issue or maybe just oil related. Maybe I can add some ATF to see if it helps?


Reply With Quote


  #2  
Old 08-31-2019, 12:50 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

I would pull the outer clutch side cover off and look at the shift scorpion.
They can develop a sharp edge that would hamper shifting.
Reply With Quote
  #3  
Old 08-31-2019, 02:17 PM
Doc Brown Doc Brown is offline
Senior Member
 
Join Date: Dec 2017
Location: Austria, Europe
Posts: 586
Default

Quote:
Originally Posted by gasgasman View Post
I would pull the outer clutch side cover off and look at the shift scorpion.
They can develop a sharp edge that would hamper shifting.
...

Are you talking about the star shaped part? I have no clue what is meant with "scorpion"...

Last edited by Doc Brown; 09-01-2019 at 03:46 AM.
Reply With Quote
  #4  
Old 08-31-2019, 06:06 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

Yes.
Should be obvious when you look at it while shifting.
Reply With Quote
  #5  
Old 08-31-2019, 07:29 PM
GG221 GG221 is offline
Member
 
Join Date: Mar 2019
Posts: 80
Default

Ok I will check it out. Are you referring to part 22/22A ?
http://partsfinder.onlinemicrofiche....20TRANSMISSION
Reply With Quote
  #6  
Old 08-31-2019, 08:05 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

Part 22 is the sprocket.
The scorpion is attached to the shift shaft.
Will be on the right side, below the clutch basket.
Reply With Quote
  #7  
Old 09-01-2019, 06:58 AM
cbutler's Avatar
cbutler cbutler is offline
Senior Member
 
Join Date: Mar 2009
Location: Hot Springs AR
Posts: 707
Default

http://partsfinder.onlinemicrofiche....20TRANSMISSION

Part #16
__________________

02 EC 200
03 MC 250
88 VT 800
01 TXT 280
Reply With Quote
  #8  
Old 09-02-2019, 07:13 PM
GG221 GG221 is offline
Member
 
Join Date: Mar 2019
Posts: 80
Default

I took what I thought was the clutch cover off and do not see what everyone is talking about. Obviously I have taken off the wrong cover, I am looking at the clutch plates. Where do I need to be looking? Am I going to need to do a lot of disassembly before I?m able to pull the correct cover off?
Attached Images
File Type: jpg B1260606-7387-4482-A7D2-6879BAA8133D.jpg (131.0 KB, 15 views)
Reply With Quote
  #9  
Old 09-02-2019, 07:27 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

The entire cover has to come off.
Drain the coolant.
Arrange the bolts as you remove them. Different lengths.
Leave the water pump and kick start gears intact.
Reply With Quote
  #10  
Old 09-02-2019, 11:00 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

Workshop manual.

https://www.dropbox.com/s/i93vw77r9k...anual.pdf?dl=0
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
shifting problem muellersq Enduro Engine - 2 stroke 9 05-15-2018 08:21 PM
Problem shifting into 1st gear. jgas Enduro Engine - 2 stroke 9 01-31-2013 03:38 PM
Shifting issues koka-nee Enduro Engine - 2 stroke 3 01-26-2011 09:57 AM
Shifting Problems jyellard Enduro Engine - 2 stroke 2 05-18-2009 05:05 AM
Not shifting while under load???? zero_chances Enduro Engine - 2 stroke 4 02-16-2007 07:40 AM




All times are GMT -5. The time now is 10:26 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org